07EA90-SI ABB GJR5251200R0101 Analog input unit

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

Technical data of analog inputs

Number of channels per module, oper. mode"12 bits" 8

Number of channels per module, oper. mode "8 bits" up to 16

Configurability oper. mode "12 bits" ±10 V, 0...20 mA (each channel can be configured

individually)

Configurability oper. mode "8 bits" 0...10 V, 0...20 mA (channels can be configured in

pairs)

Signalization of input signals see diagnosis

Input resistance per channel voltage input > 100 k?

current input approx. 330 ?

The current input has a self-protecting feature. If the current gets too high, the current input shunt is switched off and

the value for "overflow" is output. Re-activation is attempted again in increments of approx. 1 second to facilitate the

correct measurement as soon as the current regains acceptable limits.

Time constant of the input filter 470 μs for voltage,

100 μs for current

Conversion cycle (over 8 inputs + 8 outputs) 8 ms

Resolution range ±10 V oper. mode "12 bit" 5 mV (11 bit plus sign)

range 0...20 mA oper. mode "12 bit" 5 μA (12 bit without sign)

Resolution range 0...10 V oper. mode "8 bit" 40 mV (8 bit without sign)

range 0...20 mA oper. mode "8 bit" 80 μA (8 bit without sign)

Relationship between input signal and hexcode -100 %...0...100 % = 8008H...0000H...7FF8H

operating mode "12 bits" (-32760...0...32760 decimal)

Relationship between input signal and hexcode 0...100 % = 00H...FFH

operating mode "8 bits" (0...255 decimal)

Voltage inputs not used can be bridged to increase noise immunity

Current inputs not used are low in ohms, can remain open

Technical data of analog outputs

Number of channels per unit, oper. mode "12 bits" 8

Number of channels per unit, oper. mode "8 bits" up to 16

Configurability oper. mode "12 bits" ±10 V, 0...20 mA (each channel can be configured

individually)

Configurability oper. mode "8 bits" 0...10 V, 0...20 mA (channels can be configured in

pairs)

Signalization of output channels see diagnosis

Output loadability as voltage output max. +20 mA (source, current flows out of the

output)

max. -10 mA (sink, current flows into the output)

Output load resistance (burden), if current output 0...500 ?

Resolution see "analog inputs"

Relationship between output signal and hexcode see "analog inputs"

Outputs not used remain open