ABB AO610 The field controller module is guaranteed for one year

ABB AO610 The field controller module is guaranteed for one year

ABB AO610 The field controller module is guaranteed for one year

A heatsealable, silver, chemically treated polyester faced laminate used in flexible packaging of cosmetics and foodstuffs. Adhesive coated three layer laminate: PET 12μ/Adh/Alu 9μ/Adh/LLDPE 75μ. Applications and Use Polyester-faced laminated pouching material used in flexible packaging of dry and wet goods such as product samples of cosmetic creams, lotions, oils and shampoos. Good chemical resistance. Conversion and Printing The chemically treated PET face provides printability Flexo and offset with UV low migration inks. The relatively thick product has very good dimensional stability. Statement of Practical Use: Tthis product should be tested thoroughly under end-user conditions to ensure it meets the requirements of the specific application. This is particularly the case if the intended use is for food. Avery Dennison therefore request the client to do sufficient testing to make sure that the intended application does not cause any harm and is safe. Shelf Life To obtain optimal performance, use this product within half a year of the date of manufacture, under storage conditions as defined by FINAT (20-25°C; 40-50%RH). Prolonged storage outside these conditions might reduce the shelf life. Basis Weight 111 g/m2 ISO 536 Caliper 96 μm ISO 534 Elongation at break CD >55 % DIN 53455 Elongation at break MD >70 % DIN 53455 Oxygen Permeability (23°C; 50%RH) <0.05 cm3/m2/24 hr ASTM D3985 2% Secant Modulus MD >850 N/mm2 DIN EN ISO 527 T 3 2% Secant Modulus CD >800 N/mm2 DIN EN ISO 527 T 3 Flexural Modulus Fmax MD >750 mN SCAN P 29/DIN 52 121 Flexural Modulus Fmax CD >500 mN SCAN P 29/DIN 52 121 Tear Elmendorf MD >0.60 N DIN EN 21974 Tear Elmendorf CD >1.10 N DIN EN 21974 Tensile Stren. MD >35 N/mm2 ISO 527-3 Tensile Stren. CD >35 N/mm2 ISO 527-3 WVTR (38°C; 90% RH) <0.05 g/m2/24 hr ASTM F1249 Sealing Strength >35 N/15mm DIN 52 529@140°C/5 bar/0.5sec COF inside/inside 0.20 - 0.35 μs ASTM D1895 COF outside/outside 0.30 - 0.45 μs ASTM D1895

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE