3HAC17328-1/01 ABB Robot AC-SERVO Ansi Grade ABB Analog Input Module

YASKAWA Roboter AC-Servo Motor Type-B 3HAC17328-1/01, SGMAS-04ARA-AB11



Quick Details
Brand Name:Julante
Model Number:YE2
Type: Servo Motor
Frequency: 50/60Hz
Output Power: 200W
Protect Feature:Totally Enclosed
Phase:Three-phase
Certification:CCC, CE, ROHS, UL, VDE, Other
AC Voltage:208-230 / 240 V
Place of Origin:Japan
Efficiency:IE 1




OTHER SUPERIOR PRODUCTS

1. Grade: SUS201,SUS304,SUS316,A2-70,A2-80,A4-80,4.8 6.8 8.8 10.9 12.9
2. Size: M3-48
3. Standard: DIN 315
4. Certification: ISO9001, SGS, CTI, ROHS

Similar Products

A special type of overcurrent protection device used commonly in motor control circuits is the overload heater. These devices are connected in series with the motor conductors, and heat up slightly under normal current conditions:



Although the ”heater” elements are connected in series with the motor lines as fuses would be, they are not fuses! In other words, it is not the purpose of an overload heater to burn open under an overcurrent fault condition, although it is possible for them to do so.
The key to understanding the purpose of an overload heater is found by examining the single-phase (L1 / L2) control circuit, where a normally-closed switch contact by the same name (”O(jiān)L”) is connected in series with the motor relay coil.
How, exactly, do overload heaters protect an electric motor against ”burnout” from overcurrent conditions? How does this purpose differ from that of fuses or circuit breakers? Does the presence of overload heaters in this circuit negate that need for a circuit breaker or regular fuses? Explain your answers.

ELECTRICAL SPECIFICATIONS
INSULATION: CLASS B (130° C)
VOLTAGE RATING: 6-48 VOLTS DC NOMINAL
EFFICIENCY: UP TO 75%
ROTATION: CW, CCW, OR REVERSIBLE
BRUSH LIFE: UP TO 2,000 HOURS DEPENDING
ON MODEL AND APPLICATION
UP TO 5,000 HOURS WITH SPECIAL
BRUSHES & COMPONENTS
MECHANICAL SPECIFICATIONS
SHAFT: 1137-1144 CRS (STANDARD)
300/400 SERIES SS OR
CUSTOM AS REQ’D
BEARINGS: PM IRON (STANDARD)
PM BRONZE OR
BALL BEARINGS OPTIONAL
LUBRICATION: SYNTHETIC, LIFETIME LUBRICATED
LEADS: 16GA AWG TYPE GPT (80° C) (STANDARD)
OTHER GAUGES OR
HIGHER RATINGS AS REQ’D
WIRE TERMINATIONS: 1/4? STRIP (STANDARD)
OTHER TERMINALS
(I.E. #10 RING, BULLET) AS REQ’D