SGMAS-A5A2A21 Yaskawa Servo Motor 50W 0.66A Motor Use Noise Filter

Yaskawa Electric Industrial Servo 50W 0.66A Motor SGMAS-A5A2A21 new in box



QUICK DETAILS

1. Power : 0.4KW

2. Voltage:200V

3. Options : Withiut Brake

DESCRIPTION

• AC Servo Motor

• SGMAS Sigma II

• Yaskawa Electric

SEPCIFICATIONS

OTHER SUPERIOR PRODUCTS

Auxiliary equipment and options
(a) The no-fuse breaker and magnetic contactor used should be the EN or IEC Standard-compliant products of the models described in Section 14.2.2.
(b) The sizes of the cables described in Section 14.2.2 meet the following requirements. To meet the other requirements, follow Table 5 and Appendix C in EN60204-1.
Ambient temperature: 40 (104) [ ( )]
Sheath: PVC (polyvinyl chloride)
Installed on wall surface or open table tray
(c) Use the EMC filter for noise reduction. The radio noise filter (FR-BIF) is not needed.

Using Noise Filters

Use an inhibit type noise filter to prevent noise from the power supply line. The following table lists recommended noise filters for each SERVOPACK model.

Install a noise filter on the power supply line for peripheral equipment as necessary.

Performing EMC tests
When EMC tests are run on a machine/device into which the servo amplifier has been installed, it must conform to the electromagnetic compatibility (immunity/emission) standards after it has satisfied the
operating environment/electrical equipment specifications.
For the way of dealing with the EMC Directive on servo amplifiers, refer to the "EMC INSTALLATION GUIDELINES(IB(NA)67310)".