HF-KN23J-S100 Mitsubishi Servo Controller Fully Closed Self Cooling Structure

Liability:

linture is not liable for any personal injury or property damage resulting from the use of this equipment. It is

buyer's responsibility as to the safe handling & operation of this equipment and to verify equipment is

compliance to their machinery.

Description of performance parameters of Mitsubishi servo motors (mr-je series servo motors hf-kn23j-s100, hf-kn23bj-s100):

Hf-kn series (low inertia, small capacity) specification:

Power supply capacity *1[kva]: 0.5

Rated output [w]: 200

Rated torque *3[n · m]: 0.64

Maximum torque [n · m]: 1.9

Rated speed [r/min]: 300

Maximum speed [r/min]: 4500

Instantaneous allowable speed [r/min]: 5175

Power change rate at continuous rated torque [kw/s]:

Standard: 16.9

With electromagnetic brake: 13.1

Freeze current [a]: 1.3

Maximum current [a]: 3.9

Regenerative brake frequency *2*3[return / minute]: remarks *4

Inertia ratio j [10-4 kg.m2]:

Standard: 0.24

With electromagnetic brake: 0.31

Recommended load inertia ratio *1:10 times or less

Speed and position encoder: incremental 17bit encoder

Oil seal: Yes

Heat resistance grade: 130 (b)

Structure: fully closed self cooling (protection grade: IP65) *2

Environmental conditions *4:

Ambient temperature: 0~40 ℃ (no condensation) storage: -15~70 ℃ (no condensation)

Ambient humidity: below 80% RH (no condensation) storage: below 90% RH (no condensation)

Vibration: x:49m/s2 y:49m/s2

Vibration level: V10 *7

Allowable load of shaft *6:

L[mm]: 30

Radial [n]: 245

Thrust [n]: 98

Weight kg:

Standard: 1.2

With electromagnetic brake: 1.6