SGMGH-09ACA6C Yaskawa Driver Controller Transport Robot Line Motor

* Are there power factor correction capacitors being switched or existing on the intended motor loads? Switching of power factor capacitors usually generates power disturbances in the distribution system. Many VFDs can and will be affected by this. Isolation transformers or line reactors may be required for these applications.

NOTE

Avoid getting thinner on other parts of the Servomotor when cleaning the shaft.

Storage:

When the Servomotor is to be stored with the power cable disconnected, store it in the following temperature range:

Between ?20°C and 60°C

Installation sites:

The Servomotor SGM and SGMP types are designed for indoor use.

Install Servomotor in an environment which meets the following conditions:

1. Free from corrosive and explosive gases

2. Well-ventilated and free from dust and moisture

3. Ambient temperature of 0 to 40°C

4. Relative humidity of 20% to 80% (non-condensing)

5. Inspection and cleaning can be performed easily

If the Servomotor is used in a location subject to water or oil mist, install a shield cover over the Servomotor.

SIMILAR PRODUCTS

OTHER SUPERIOR PRODUCTS