Hot Sale Clothes Hanger Machine Making

The hanger machine adopts fully automatic numerical control technology. The machine can produce many kinds of clothes hangers, with precise wire feeding, smooth operation and low noise. A worker can manage 2-4 machines, which can save labor for you. The machine is suitable for the following materials: 201 stainless steel, 410 stainless steel, electroplating line, ordinary wire coating wire and aluminum wire.

1). Feeding speed is fast, and the length of the wire feeding is standard.

2). The speed can be adjusted according to the wire diameter.

3). It can produce about 50 pieces per minute, with high output and fast speed.

4). It is convenient and simple to change the mold by entering the required wire length on the screen and moving the cutter position.

5). The operation of the fully automatic hanger molding machine can be automatically operated and manually operated by the operation buttons of the touch panel.

 Main parameters:

Working machine:

The hanger machine uses sheet metal welding technology to eliminate internal stress during vibration. The machine has high strength and good rigidity. It adopts double hydraulic cylinder with mechanical limiter and synchronous torsion bar for stable and reliable operation and high precision. The rear block distance and slider are electronically controlled, manually fine-tuned mode, and equipped with a digital display device, which is convenient and quick to use. The upper mold is equipped with a deflection compensation device.

NOTES

1. When the prototype is in the power-on state, forcible rotation of the feeding motor is not allowed, otherwise the controller will be damaged. If you need to rotate the feeding motor, please use the key of "point feeding", "point feeding", "point feeding", "manual feeding" in the operation interface "production monitoring".

2. Please operate the machine under the condition of guaranteeing the molding machine and personal safety.