Pic16lf1939-ipt 8-bit microcontroller MCU original stock

High-Performance RISC CPU:
? Only 49 Instructions to Learn:
- All single-cycle instructions except branches
? Operating Speed:
- DC – 32 MHz oscillator/clock input
- DC – 125 ns instruction cycle
? Up to 16K x 14 Words of Flash Program Memory
? Up to 1024 Bytes of Data Memory (RAM)
? Interrupt Capability with automatic context saving
? 16-Level Deep Hardware Stack
? Direct, Indirect and Relative Addressing modes
? Processor Read Access to Program Memory
? Pinout Compatible to other 28/40-pin PIC16CXXX 
and PIC16FXXX Microcontrollers
Special Microcontroller Features:
? Precision Internal Oscillator:
- Factory calibrated to ±1%, typical
- Software selectable frequency range from 
32 MHz to 31 kHz
? Power-Saving Sleep mode
? Power-on Reset (POR)
? Power-up Timer (PWRT) and Oscillator Start-up 
Timer (OST)
? Brown-out Reset (BOR):
- Selectable between two trip points
- Disable in Sleep option
? Multiplexed Master Clear with Pull-up/Input Pin
? Programmable Code Protection
? Wide Operating Voltage Range:
- 1.8V-5.5V (PIC16F193X)
- 1.8V-3.6V (PIC16LF193X)
PIC16LF193X Low-Power Features:
? Standby Current:
- 60 nA @ 1.8V, typical
? Operating Current:
- 43 ?A/MHz @ 1.8V, typical
? Timer1 Oscillator Current:
- 600 nA @ 32 kHz, 1.8V, typical
? Low-Power Watchdog Timer Current:
- 500 nA @ 1.8V, typical
Peripheral Features:
? Up to 35 I/O Pins and 1 Input-only pin:
- High-current source/sink for direct LED drive
- Individually programmable Interrupt-on-pin 
change pins
- Individually programmable weak pull-ups
? Integrated LCD Controller:
- Up to 96 segments
- Variable clock input
- Contrast control
- Internal voltage reference selections
? Capacitive Sensing module (mTouchTM):
- Up to 16 selectable channels
? A/D Converter:
- 10-bit resolution and up to 14 channels
- Selectable 1.024/2.048/4.096V voltage 
reference
? Timer0: 8-Bit Timer/Counter with 8-Bit 
Programmable Prescaler
? Enhanced Timer1:
- Dedicated low-power 32 kHz oscillator driver
- 16-bit timer/counter with prescaler
- External Gate Input mode with toggle and 
single-shot modes 
- Interrupt-on-gate completion
? Timer2, 4, 6: 8-Bit Timer/Counter with 8-Bit Period 
Register, Prescaler and Postscaler
? Two Capture, Compare, PWM Modules (CCP):
- 16-bit Capture, max. resolution 125 ns
- 16-bit Compare, max. resolution 125 ns
- 10-bit PWM, max. frequency 31.25 kHz
? Three Enhanced Capture, Compare, PWM 
modules (ECCP):
- 3 PWM time-base options
- Auto-shutdown and auto-restart
- PWM steering

- Programmable Dead-band Delay

Peripheral Features (Continued):
? Master Synchronous Serial Port (MSSP) with SPI 
and I2CTM with:
- 7-bit address masking
- SMBus/PMBusTM compatibility
- Auto-wake-up on start
? Enhanced Universal Synchronous Asynchronous 
Receiver Transmitter (EUSART):
- RS-232, RS-485 and LIN compatible
- Auto-Baud Detect
? SR Latch (555 Timer):
- Multiple Set/Reset input options
- Emulates 555 Timer applications
? 2 Comparators:
- Rail-to-rail inputs/outputs 
- Power mode control
- Software enable hysteresis
? Voltage Reference module:
- Fixed Voltage Reference (FVR) with 1.024V, 
2.048V and 4.096V output levels
- 5-bit rail-to-rail resistive DAC with positive 
and negative reference selection