Ir2136strpbf Gate Drive IC Infineon Original Stock

describe

Ir2136x (j&s) is a high-voltage, high-speed power MOSFET and IGBT Driver with three independent high and low side reference output channels for three-phase applications. The proprietary HVIC technology makes the solid monolithic structure possible. The logic input is compatible with CMOS or LSTTL output, up to 3.3V logic. The current trip function that terminates all six outputs can be derived from an external current sensing resistor. There is an enable function that can terminate all six outputs at the same time. The open drain fault signal indicates an overcurrent or undervoltage shutdown.

After external programming through the RC network connected to the RCIN input, the overcurrent fault condition is automatically cleared. The output driver has a high pulse current buffer stage, which is designed to minimize driver cross conduction. Match the propagation delay to simplify use in high frequency applications. Floating channel can be used to drive n-channel power MOSFET or IGBT in high side configuration, running up to 600V. 

Characteristics

? floating channels designed to guide operations

? full operation at +600 V

? withstand negative transient voltage, dv/dt immunity

? grid drive power range is 10 V to 20 V (ir2136/

Ir21368), 11.5 V to 20 V (ir21362d) or 12 V to 20 V (ir21363/ir21365/ir21366/ir21367)

? undervoltage lockout of all channels

? overcurrent shutdown shuts down all six drives

? independent 3 half bridge drives

? matched propagation delay for all channels

? cross conduction prevention logic

? the low voltage side output is out of sync with the input. High voltage side output

Out of phase (ir213 (6,63, 65, 66, 67, 68)) or in-phase (ir21362) with input

? 3.3 V logic compatible

? lower di/dt gate drive, better noise immunity

? external programmable delay for automatic fault clearing

? all parts are lead-free