Stainless steel industrial dryer 50KG three-legged centrifuge hardware plastic food multi-function dehydrator Centrifuge

Dehydrator

Features:

1. Open centrifugal dewatering design.
2. Three-legged suspension, shock absorber effect is particularly good.
3. The inner casing and the outer casing are made of high-quality stainless steel, balanced and balanced, safe and reliable.
Technical performance:

1. It adopts stainless steel inner tank, which is excellent in material, firm and durable, effectively reduces fabric wear and prolongs the service life of the cloth.
2. Suspension suspension structure makes the operation stable and the vibration is small.
3. Excellent dewatering performance and ideal dewatering effect.
4. Install the pedal emergency brake device to urgently correct the operation and improve the safety performance.
5. Flexible operation and easy maintenance.
6. Horizontal design, economical and practical.

Technical Parameters

Voltage 380V

Power 2.2KW

Speed 700r/min
Load 50KG
Wooden box packaging 830*910*850
Inner cylinder diameter 550mm height 350MM
 Precautions:
1. Do not reach in or add objects while the drum is turning.
2. Although the motor has waterproof function, it should be kept as dry as possible.
3. Do not clean the foot pad in the machine to avoid a large amount of sediment accumulated in the machine, block the water and damage the machine.
4. A reliable leakage protector must be installed.
5. Pay attention to the safety of electricity and related safety regulations during operation. Unexpected operation may cause accident or discomfort.
The manufacturer does not assume any responsibility for the operation
installation:
1. The foundation requires concrete with a thickness of 10cm or more and placed horizontally to ensure the four mounting ears of the dehydrator.
On the same plane.
2. Put the anti-vibration rubber block on the four mounting ears and use the M14 pull-out screw on the ground.
3. Connect the power supply. Connect a wire to the grounding "" on the fuselage, and connect the other end to the ground of the power supply.
4. Connect the drain pipe.
Installation suggestion: Because the centrifugal force is relatively large when the machine is working, it is necessary to hit the concrete pier to better fix the machine.