Hot Sale CT/CT-C Series Hot Air Circulation Drying Oven for Food Fruit & Vegetable

CT-C hot air circulating oven is equipped with axial flow fan and automatic constant temperature control system. The computer control system is also available. The thermal efficiency of our hot air circulation tray dryer is up to 70%. The biggest characteristic of this drying equipment is that part of the hot air circulates inside the oven, and the whole circulating process is closed, thus enhancing heat transfer and energy saving. Dual counter-rotating shafts with unique intermeshing hollow wedge-shaped paddles produce intimate mixing, optimize heat transfer, and provide a self-cleaning feature. A large heat transfer area to volume ratio is achieved by the use of hollow paddles and a jacketed vessel, through which the heating medium flows. The result is an efficient, compact machine with less space requirements and lower installation cost.

Features:

1. This hot air circulation tray dryer has a wide range of application, as general drying equipment can dry all kinds of materials.

2. The heat source can use steam, conduction oil, electricity, hot water and far infrared.

3. It has a wide range of temperature adaptation, the normal temperature can be heated to 140ºC by steam and 350ºC by electric heating.

4. CT-C hot air circulation tray dryer has the advantages of small noise, stable movement, automatic temperature control, easy installation, and maintenance.

5. The dimension of the standard drying tray is 460×640×45 mm.

6. Drying trolley can be manufactured with mobile type, easy to move out for cleaning and maintenance.

1. Blanking dryer low energy consumption: due to indirect heating, there is no large amount of heat taken away with the air, the dryer wall is installed the insulation layer, save more energy than the usual convection drying method.

2. Hollow paddle dryer system cost is low: the unit effective volume has a huge heat transfer surface, to shorten the processing time, equipment size becomes smaller, it greatly reduces the building area and building space.

3. A wide variety of process problems can be solved by using any kinds of heating source. It is especially suitable for drying heat sensitive materials and light temperature materials. The normal heat transfer medium can be steam, heat transfer oil, hot water, as well as cooling water etc... The dryer can be used for continuous or batch processing. It has been widely used in many industry areas already.

4. Small environmental pollution: do not use air with dust material. Material solvent evaporation is very small, easy to handle. For the pollution of the material or the need to recover the solvent conditions, can be used the closed circuit.

5. Low operating costs: normal operation of the device, only 1 hour/day. Low-speed mixing and reasonable structure. Wear rate is very low, and maintenance costs are also very low.

6. Stable operating continuously: Because of the special compression and inflation of the agitation function of paddle dryer, the material grains touch the heat-transfer area thoroughly. Within the axis direction, the temperature, moisture, mixture, and grades of the materials is very small so as to guarantee the stability of the whole process.

91.8% Response Rate

91.8% Response Rate

91.8% Response Rate