Best Sale Energy-saving Fluid bed drying solution for Citric acid

 Design conditions:
Initial moisture: 12% Final moisture: ≤7.5% Production: ≥2000Kg/h Granularity: 3-100 mesh Material bulk specific gravity 0.8g/cm2 Raw material temperature: 15-18 Product temperature: ≤25 (cooled) This project is From feeding to discharging (including dehumidification system, air heat exchange system, rotary dehumidifier, equipment main body, dust water film recovery system), all equipments including pumps, valves, pipelines, instruments, equipment main body, electrical, automatic control System (interlocking). The motor uses Siemens Beide energy-saving motor, protection class IP54, electric control cabinet electrical components (including inverter) Schneider, PLC Schneider (optional Siemens), bearings adopt SKF or NSK (alternative domestic first-line brand); airbag damping. Anti-corrosion requirements: Partially blasted and rust-painted of carbon steel, partially blasted and pickled in stainless steel. 

Main features of fluidized bed dryer
1. High degree of fluidization. The material is evenly heated, the heat exchange is sufficient, the drying strength is large, and uniform drying, cooling and humidifying products can be obtained; there is no dead bed, turbulence and channeling phenomenon.
2, good adjustability, wide adaptability. Material residence time and layer thickness as well as amplitude and drying temperature can be adjusted.
3. Good sealing. The fully enclosed structure effectively prevents cross-contamination between materials and air, and the operating environment is clean.
4. The surface damage of the material is small. Can be used for drying of delicate materials.
5. The structure design is reasonable. Smooth rotation, convenient maintenance, low noise and long life.