Hipot Test Set

Contact US 

Email:coco@launch-electric.com

Advantage

1. Safe Optical isolation technology, 

2. Easiest to use Fully automatic microcontroller

3. H/L voltage closed loop negative feedback control

4. Built-in printer

5. Built-in protective resistors                               

6. True sine wave output

7. Real-time display of actual output waveform         

8. Ergonomic, menu guided, large Colour Touch LCD opration

9. Storage of test results for later retrieval and print.                        

10. Over voltage and current protected

11. Variable frequency 0.1Hz, 0.05Hz, 0.02 Hz, 0.01Hz.

12. Data of current, voltage and waveform directly sampled at HV side.

13. AC testing does not degrade good cable insulation

14. Harmful space charges are not injected into the cable insulation

15. No traveling waves are generated during testing

16. Rugged and reliable design less prone to failure from transients

17. Invatation Patent                                                    

18. CE mark

19. Portable,  1 Control unit + 1 Booster

Safety features

1. Short circuit protected.

2. Status display of all important safety functions and messages.

3. Safe, easy to use operation with emergency off and key switch lock-out.       

4. Fully integrated discharge circuit to safely ground the DUT after testing.

5. Zero start interlock.

6. Zero voltage switching.

Specification

1.Power: 220V ± 10% AC, 50/60 Hz, single phase (110KV source can be customized);

2. AC Output-Voltage :30KV, 40KV, 50KV, 60KV, 70KV, 80KV, 90KV, 100KV peak (DC output for optional);

3.Output frequency: 0.1Hz, 0.05Hz, 0.02 Hz, 0.01Hz (0.01Hz for optioanl);

4. Stability of frequency: Fluctuation<0.5%

5. Measurement accuracy: ±3%.

6. Positive and negative voltage peak error: ≤3%.                               

7. Voltage waveform distortion: ≤5%                                   

8. Construction:Control unit and Booster (there are 2 boosters for ≧60KV set)                             

9. Ambient conditions of use: temperature Indoor and outdoor : -10oC ～ + 50oC.          

10. Humidity:≤85%  

12.Test set includes:1 controller + 1 booster + 1 capacitor, or 1 controller + 2 boosters +1 capacitor

     (Capacitor can be used as device under testing for check/demo, or used as capacitive compensation when test object’s capacity is too low).

13.Main technical datas for LQ Series:

Accessaires

Contact US

Email:info@launch-electric.com