Home > Products > electronic communication equipment > 4EOC master Module+ONU+OR All In One EOC Master
4EOC master Module+ONU+OR All In One EOC Master
- shanghai
- T/T L/C D/P D/A PayPal
- 1 days
You May Like
Product Details
| Place of Origin | China |
Product Description
The BAUDCOM All-In-One product is designed to provide Internet Service to subscriber’s home through the existing coaxial access network. With EPON/GPON, EOC and HFC technology , the All-In-One product meets the CATV broadcasting, VOD and Internet Service requirement of cable operators for FTTB/FTTC. It build with EPON/GPON ONU, EOC master and Optical Receiver module in one housing.
The Optical Receiver module received the optical signal from the Optical Transmitter of HFC network, and the signal processed by the PD, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 108dBuv( 4*RF output) or 112dBuv (2*RF output). Ethernet data is delivered to ONU through the EPON or GPON network form the OLT.
The EOC Master module meets Home-plug AV standards, is designed based on Qualcomm AR7410 chip-set with high anti-jamming capability OFDM technology. It will modulate the Ethernet data into EOC RF signal in the 7.5-65MHz .The EOC signal and CATV signal (87~860MHz) can run on one coaxial cable without interference. The EOC Master can provide high speed data service at 600Mbps PHY Layer speed, the MAC Layer throughput is up to 320Mpbs.
Function Features
Standards
Complies with EPON or GPON standards
Complies with HomePlug AV international standards and IEEE 1901 Standard
Product Configuration
Configurations available with 1 EPON or GPON ONU module
Configurations available with 2 or 4 HomePlug AV EOC Master modules
Configurations available with 1 HFC Optical Receiver
Configuration available with WDM inside or not
RF output configurations with 2 or 4 outputs
Line Power (from 90 to 264 VAC) or Cable Line Power (60VAC) optional
35/47, 42/54, 65/87 type High/Low Filter optional to meet your network
CATV RF Features
Supports higher RF output: 112dBuv@2*RF output, 108dBuv@4*RF output
AGC (from -6 to 0dBm) function for stable RF output
Data Transportation in Coaxial Cable
Supports data throughput of greater than 300 Mbps per EOC Master module
Supports Max . link loss greater than 85 dB (40Mbps throughput in lab)
Recommend 40~50dB link loss for about 300 throughput
Network Management
CLI, SNMP management for ONU module
WEB, SNMP management for EOC module
Optical Receiver status monitor and control by PON system
Other Features
IP67 Housing, aluminum alloy die casting shaping
Line Power 60AC feed in and out
Item Parameters Specification Main Functional Module Configuration ONU 1 x GPON or 1* EPON ONU EOC Master 2*EOC Master or 4*EOC Master CATV 1 x CATV Optical Receiver with WDM or not External Interface Fiber Port 5/8” type, 2 port, for Fiber Optic Pigtail input COM Port F-Type female, 4 output port for mixed EOC and CATV signal Power Input Port F-Type female, line power(40-90VAC) input version Power cord with China plug, Uplink Broadcast CATV (optional with WDM or not) With WDM version, 1*CATV/PON optical input, SC/APC, 1*PON output, SC/PC, connected with ONU input Without WDM Version, 1*CATV optical, SC/APC Ethernet Data (EPON or GPON optional) 1*EPON PX20+, SC/PC (EPON Version) 1*GPON Class B+, SC/PC (GPON Version) Specification of ONU Parts EPON Standard compliance IEEE 802.3ah Optical Interface 1 x EPON PX20+, SC/PC Transmission Rate Upstream: 1.25Gbps, Downstream: 1.25Gbps Transmission Distance 20Km@1:32 Optical Fiber Type 9/125um, Single Mode, Single Fiber Wavelength Upstream 1310nm, Downstream 1490nm Optical Power Tx 0dBm to 4dBm (PX20+) Receiving Sensitivity -27 dBm GPON Standard compliance ITU-T G.984.X Optical Interface 1 x GPON CLASS B+, SC/PC Transmission Rate Upstream: 1.244Gbps, Downstream: 2.488Gbps Transmission Distance 20Km@1:64 Optical Fiber Type 9/125um, Single Mode, Single Fiber Wavelength Upstream 1310nm, Downstream 1490nm Optical Power Tx +0.5dBm to +5dBm(Class B+), +0.5dBm to +5dBm(Class C+) Receiving Sensitivity -27 dBm(Class B+), -30 dBm(Class C+) Indicator Indicator Description PWR: Power up or down PON：ONU registered LOS: Optical Link Status ETH: Link Status of ONU Ethernet port to EOC master Network Management Management Mode Support IEEE802.3 OAM (EPON) Support ITU-T G.984.X OMCI (GPON) Support Remote management through SNMP Suppoort Remote Management via Telnet Function Status monitor, Configuration management, Alarm management, Log management Specification of OR Optical Specifications Wavelength Without WDM version: 1550 nm With WDM version: 1540~1560nm (CATV), 1260-1500nm(PON) Optical Power Input Range -8 ~ +2 dBm Recommend optical Power Input Range -6 ~ 0dBm Optical Input Return Loss ≥45 dB RF Specifications Bandwidth 45~860 MHz Flatness ≤±1.5 dB Nominal RF Output Level 108 dBuV (4*RF Output ) Impedance 75 Ohm Return Loss ≥14 dB CNR ≥51 dB CSO ≥60 dBc CTB ≥60 dBc Note: CNR, CSO, CTB parameter testing environment is in1550nm directly modulation transmitter, optical input -1dBm，OMI=3.2%, 59CH PAL-D signal load. Optical and temperatureAGC Stability of RF Level underoptical AGC ≤±1 dB AGC Scope -6 ~ 0dBm LED Indicator Indicator Description OPT-L: Optical power is lower OPT-M: Optical power is nominal RF1: Status of Output 1 of optical receiver module RF2: Status of Output 2 of optical receiver module Specification of EOC Master Interface Management Port 1 * 10/100/1000M auto-negotiation, RJ45 LED Indicator LED Indicator PWR: Power Supply Status LINK: CABLE Link Status indicator ETH1: Ethernet Ports Status connected as uplink ETH2: Ethernet Ports Status connected as downlink Performance Parameters RF Parameters Frequency Band :7.5-65MHz RF Output Level: 110±5dBuv @4 RF output port (4 EOC master version) 105±5dBuv @4 RF output port (2 EOC master version) Receive sensitivity: 45dBuv Transmission PHY Layer: 600Mbps Throughput on MAC Layer: 320Mbps Modulation Mode OFDM2690 carriers, 4096/1024/256/64/16/8 QAM, QPSK, BPSK, ROBO Working Mode TDMA/CSMA Encryption Mode AES-128 Standard EOC Standard IEEE P1901(Draft) , HomePlug AV Ethernet Standard IEEE 802.3, IEEE 802.3x, IEEE 802.3u IEEE802.1P, IEEE802.1Q Software Network Management WEB, CLI, SNMP Software Features VLAN, QOS, Bandwidth Control, Broadcast storm limitation Physical Features Physical Features Power supply Line Power(90-264VAC) Cable power(60VAC) optional Power Consumption Consumption：<45 W (4 EOC master Version) Consumption：<36 W (2 EOC master Version) Size Dimension：290×220×120mm Net weight 4.2kg (4 EOC master Version) 3.7kg (2 EOC master Version) Environment Attribute Working Temperature：-20 ~ 65℃ Storage Temperature：-40 ~ 85℃ Working humidity：10% ~ 90%non-condensing Storage humidity：10% ~ 90% non-condensing
Mains Powered (90-264VAC) version
Contact Us
- Shanghai Baudcom Communication Device Co.,Ltd
Product Categories
| electronic communication equipment | phone |
New Products
-
4channel dry contact closure over fiber converter modem
-
Fiber-1Voice+4E1+4FE+4RS232 Multiplexer
-
RS422 Optical Fiber Modem
-
DS3 Fiber Modem | T3 Fiber Modem
-
V35 Fiber Modem
-
RS232 over fiber optical modem
-
E3 Fiber Modem
-
E1 Fiber Modem
-
16E1 Fiber Multiplexer
-
4E1 Fiber Multiplexer
-
8E1 PDH Optical Multiplexer
-
16E1+8FE MANAGABLE FIBER MULTIPLEXER
-
4E1+4ETH Managable Fiber Multiplexer
-
8E1+4101001000 Gigabit Ethernet PDH Fiber Multiplexer
-
16E1 4Ethernet Optical Fiber Multiplexer with LCD Management
-
4Gigabit Ethernet+16E1 Fiber Multiplexer With Local Management
-
8E1 fiber multiplexer,4Ethernet,Serial Data,Orderwire as Options
-
Modularized Fiber Optical Multiplexer
Popular Searches
Recommended Products
- Oven Protection Sleeve , Fiber Optic Heat Oven Sleeve
- 1x32 MEMS optical switch
- 1X24 MEMS Fiber Optical Switches
- 1X24 MEMS optical switch module -xionghua
- 1550nm 1X16 MEMS optical switch
- 1X16 MEMS optical switch module
- SM 1X4 MEMS optical switch
- 1310nm 1X4 MEMS optical switch module
- 1550nm 1X8 MEMS optical switch module
- MEMS 1x8 Fiber Optical Switch —xionghua
- DC-BLOCK DB-4310FM-6
- F/UTP Cat.6A Patch cord 23AWG 7*0.2 LSZH - 2m
Find Similar Products By Category
- Electrical & Electronics > Telecommunication & Broadcasting > Fiber Optic Equipment
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile