4channel dry contact closure over fiber converter modem

PRODUCT CHARACTERISTIC

• Based on the integrated circuit intellectual property rights;

• The input switch normally open and close automatically, when the input state, switch output that is why state, convenient opening;

• The switch quantity of other switch state stability in the boot state or fiber no access, no chaos motion state;

• Provide 1~4 way dry contact;

• A switch interface lightning reaches IEC61000-4-5 (8/20 μ S) differential mode: 6KV, impedance (2); common mode: 6KV, impedance (2) standard;

• The optional AC 220V, DC -48V, DC +24V, DC power supply positive and negative pole points (this device supports only DC +5V supply).Fiber Interface

• Optical interface: SC/FC

• Optical core: single fiber

• Optical Wavelenth: 1310 nm/1550nm

• Sending consumption: -8dBm/-14dBm

• Receiving and dispatching module:>-6dBm

• Optical receiver receiving sensitivity: <-33 (BER<10 -10):

• Dynamic range receiving: >-30dB

• Optical code:NRZ

• Transmit distance: single-mode with 20KM.Multi-mode with 2km

Dry contact 

Response time: <2ms

Delay time: 0.5ms

Switch signal: 30VDC/0.5A

Connector: RJ45

Frequency response: 20HZ/S

Power supply                        

DC5V

Power Consumption:    <=3 Watts

environment condition                  

Operating temperature:  0C~+50 C

Storage temperature:   -20 C~+70 C

Relative temperature:95% (uncondensed)

Dimension                  

• 103mm(L)

• 93mm(W)

• 28mm(H)