Parameters:
Basic Parameters:
- Model Number: GTB-600
- Maximum Input Power: 600 Watt
- Peak Power Tracking Voltage: 22-50V
- Min / Max Starting Voltage: 22-55V
- Maximum DC Short-circuit Current: 30A
- Maximum Input Operating Current: 27.2A
- Ambient Temperature Range: -40℃ to 60℃
- Dimensions(L x W x H): 280 x 200 x 40mm
- Weight: 1.62kg
- Waterproof Level: IP65
- Cooling Way: Self-cooling
- Communications Mode: WiFi mode
- Power Transmission Mode: Reverse transfer, load priority
- Monitor System: Mobile APP, PC browser
- Electromagnetic Compatibility: EN50081.part1, EN50082.part1
- Grid Disturbance: EN61000-3-2 Safety EN62109
- Grid Detection: CE EN-50438
- Certificate: CE

Output Data:
Output Parameters @120V:
- Peak Output Power: 600 Watt
- Rated Output Power: 600 Watt
- Rated Output Current: 5A
- Rated Voltage Range: 80-160VAC
- Rated Frequency Range: 48-51Hz/58-61Hz
- Power Factor: >99%
- Max Unit Per Branch Circuit: 5pcs (Single-phase)

Output Efficiency @120V:
- Static MPPT Efficiency: 99.5%
- Maximum Output Efficiency: 95%
- Night Time Power Consumption: < 1W
- THD: < 5%

Output Data:
Output Parameters@230V:
- Peak Output Power: 630 Watt
- Rated Output Power: 600 Watt
- Rated Output Current: 2.6A
- Rated Voltage Range: 180-260VAC
- Rated Frequency Range: 48-51Hz/58-61Hz
- Power Factor: >99%
- Max Unit Per Branch Circuit: 10pcs (Single-phase)

Output Efficiency@230V:
- Static MPPT Efficiency: 99.5%
- Maximum Output Efficiency: 95%
- Night Time Power Consumption: < 1W
- THD: < 5%

LED Display:
1. Red light 3 second---Red LED light 3 second
while device starts , then in working condition;
2. Green flash fast---MPPT searching;
3. Green flash slow---MPPT + searching;
4. Red flash slow---MPPT - searching;
5. Green lights on 3s and off 0.5s---MPPT locked;
6. Red light steady---a. Islanding protection; b.Over-temperature protection; c.Over / low AC voltage protection; d.Over / low DC voltage protection; e.Fault Remarks:
LED flashing in the process of being working condition:inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT + searching)/ Red LED flash slow (MPPT - searching) / Green LED lights on 3s and off 0.5s (MPPT locked) .

Package Included:
- 1 x Solar Micro Inverter
- 1 x Warranty Card
- 1 x User Manual
- 1 x Certificate of Quality
- 1 Pouch of Screw for Micro Inverter Installation
- 1 x AC Cable

Notes:
-Please connect the inverter following the operation instruction show above. If you have any question, please contact with relative persons.
-Non-professionals do not disassemble. Only qualified personnel may repair this product.
-Please install inverter in the low humidity and well- ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials.
-When using this product, avoid children touching, playing, to avoid electric shock.
-Connected solar panels, battery or wind generators DC input DC power supply cable.

Structure of Solar Power System

Installation:
Step1: Installation for fixed the inverter on the PV holder with the screws attached is as following:

Step2: Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative. Show below:

Step3: Open the waterproof cap on AC output side of the micro inverter, then plug to AC power line. Show below:

Step4: Plug the AC output line to main AC cable;
Step5: Repeat the first step to the third step to complete the installation of micro inverters;
Step6: Finally, please connect the AC main cable to the utility grid.

Connection:

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

Please do not hesitate to contact me if you need any further information

Whatsapp/Tel/Wechat: 8619902906050

Web: 

Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)