FRP Acid Gas Scrubber, Acid Fume Scrubber

The FRP Acid Mist Gas Absorption Scrubber Tower is mainly composed of Water tank, Circulating water, Packing layer, Spraying system, Demister etc.
The FRP Acid Fume Scrubber Tower is designed to capture dust particles, VOCs, chemical fumes, and other water / chemically soluble fumes and Vapors generated in industrial process.

Desulphurization spray layer is based on the upper part of the tower, the absorption tower slurry circulating pump corresponding to each spray layer. The nozzle configuration of spray layer is simulated designed by professional software in order to ensure good contact with alkali and acid reverse gasreaction; and finally reach purification effects.
Demister installs in the upper of desulphurization tower, a total of two levels.The net is used to separate the entrainment of flue gas cloud droplets, and droplet concentration in flue gas export from mist eliminator is less than 75 mg/Nm3 (dry basis).
At the same time, the equipment also has spray washing device to the tiny dust particles adhesion and desulphurization of flue gas crystallization on the demister system resistance increases.

All fiberglass acid fume scrubbers can be customized per client's drawing or requirements. 

Working Principle of Fiberglass Acid Fume Scrubber Towers

Chemical industries
Pulp and paper industries
Petrochemical industries
Steel making
Corn Processing Facilities
Food Manufacturing

Pharmaceutical industries
Fertilizer production and processing industries
Machining and Grinding exhaust
Fiberglass & Composite Industries
Utility Boilers
Foundries and Metal Finishing Operations

1. This purification tower should be installed on anti corrosion basis which is higher 100mm than ground. Pump with acid resistance should be on another anti corrosion basis.
2. This equipment should be installed indoor, in order to prevent cold weather from effecting on equipment and absorption solvent.
3. If there is no PH controlling system, PH of acid or alkali solvent should be checked regularly, and consistency should be adjusted at any time.

4. Spray-head and filling material should be checked regularly, in order to avoid plugging, any problems should be solved immediately.

Our plant founded in 1992 with annual capacity of 60000 tons, is located in biggest FRP production base of China - Hengshui City .

With high quality and reliable and professional service, our frp products have been exported to all over the world including USA, Japan, Brazil, Germany, Egypt, India, Malaysia and won good fame and trust from new and old clients.

Meantime we have made good cooperation with many firms of top 500 of the world, such as BAYER, BASF, Rohm and Haas, DOW Chemical, Fluor, etc. 

FRP Tank Filament Winding Workshop

FRP Tower Making Workshop

Inspection Center

A: We are a company with trading company and factory together. Our trading company is named Hengshui Aoliande Trading Co., Ltd and factory named Hengshui Jiubo Composites Co., Ltd. 

A: For FRP products, all dimesion can be customized. We can make it per client's requirement. 

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls send inquiry to us directly.