ASTM D1401 Water Separability of Petroleum Oils and Synthetic Fluids Tester separation property analyzer

Water Separability of Petroleum Oils and Synthetic Fluids Tester      ASTM D1401

Product model: JF7305

Product Introduction

This instrument is suitable for determining the water separability of petroleum and synthetic fluids. During the test, put a certain amount of sample and distilled water into the pain, and stir at a certain temperature for 5 minutes, and record the time required for the separation of the emulsion. After standing for half an hour or one hour, if the emulsion is not completely separated, or the emulsified layer is not reduced by 3 ml or less, record the volume of the oil layer, water layer and emulsified layer at this time.

Technical Parameter

1. Applicable standard: ASTM D1401 ISO6614

2. Temperature control method: imported PID digital display thermostat

3. Temperature control: normal temperature~90±1℃

4. Heating method: water bath heating

5. Power of the whole machine: 1.5KW

6. Working unit: 3/5 tube

8. Power supply: AC220V/50Hz

9. Timing method: digital display timer

Main Feature

1. It can measure the water separation characteristics of petroleum (synthetic fluid, Herschel emulsifier);

2. The instrument includes a stainless steel frame, a control box, a tank, and an electronic lift, which can move the stirring blade up and down in the column. Digital display of mixing speed;

3. Silico-borosilicate glass tank, 250mm deep, fixed on the ceramic-coated stainless steel stand;

4. Aluminum-plated cover, multiple rotatable positions, can hold sample cylinder. A positioning device can place the column under the blade of the sample stirrer, which can avoid breakage when positioning errors occur;

5. The electronic lifter can be used for stirring support;

6. The stirrer on the electronic heating bath;

7. Stainless steel heater;

8. Electronic sample stirrer;

9. The digital tachometer can continuously display the stirring speed;

10. The electronic timer can automatically turn off the stirring after 5 minutes of stirring;

11. Microcomputer controller, PID function, digital display temperature (continuous display during testing), degree 0.1℃, Pt100 RTD temperature probe, adjustment ± 0.1℃;

12. Safety facilities can prevent overheating and low water level;

13. It is very convenient to access the control box;

14. 100 ml borosilicate glass cylinder with scale