JIS K2246 Oxygen Inhalation of Rust Preventive Oils Tester oxygen uptake rust-proof analyzer Anticorrosive oil instrument

Oxygen Inhalation of Rust Preventive Oils Tester        

JIS K2246

Product model: JF0060

Product Introduction

The principle of use of this instrument is very simple: put the sample in an oxygen bomb that meets certain conditions to oxidize, observe and record the pressure at a specified time interval. After 100h, the oxygen absorption degree of the sample is indicated by the corresponding decrease of the oxygen pressure. The instrument is suitable for anti-rust grease and anti-rust grease.

Technical Parameter

1. Applicable standard: JISK2246 

2. Heating method: electric heating tube heating

3. Power of the whole machine: 2.5KW

4. Control mode: automatic control by single chip microcomputer

5. Timing mode: automatic recording by single-chip microcomputer

6. Result processing: automatically record and store the results

7. Pressure display: LCD screen displays real-time curve

8. Power supply: AC220V/50HZ

Performance Characteristics

1. Standard brass small round plate Φ33×1.2mm;

2. The whole test process adopts single-chip microcomputer automatic control, without manual operation;

3. The test process is displayed in real-time with a curve on the LCD screen, and the results are clear at a glance;

4. Two tests can be done at the same time, which is convenient for making parallel samples, and the test results are automatically stored;

5. Automatic detection of oxygen bomb pressure leakage and phoenix buzzer;

6. The high-density pressure transmitter converts the pressure signal, and the digital display is on the LCD screen;

7. Stainless steel heater, heating bath;

8. The instrument has an automatic correction function and can be repaired online;

9. A variety of thermal insulation materials are used for heat insulation to avoid scalding staff;

10. A single sample dish holder can hold 5 sample dishes;