ASTM D3241 Jet Fuel Thermal Oxidation Stability Tester fuel heat oxidation analyzer JFTOT Method Lab equipment Test equip

Jet Fuel Thermal Oxidation Stability Tester         ASTM D3241

MODEL： JF9169Z

Product Introduction

The instrument is designed in accordance with the method requirements of ASTM-D3241, T9161/T9161, and adopts 9GB priori technology to realize the automation of the instrument test process; the touch-operated industrial computer can monitor the working status and working interface of the instrument at any time; there is self-diagnostic failure Alarm and protection system; the computer operating program designed by ASTM-D3241 ensures the correctness and integrity of the entire test process; the instrument also has the function of historical data test storage and report printing; the instrument also has the function of custom setting system parameters, and the instrument can be divided into two Large system; analysis system and control.

Product parameter

1.Applicable Standard: ASTM D3241

2. Test temperature: 100℃ ~ 380℃±1℃

3. Pressure difference: 0 ~ 340mmHg

4. Pressure system: 500psi±50psi

5. Test sample volume: 600ml

6. Cooling water flow: 38±8L/H Cooling water pressure: 0.1～0.4Mpa

7. Differential pressure measurement accuracy: Class 0.3

8. Differential pressure display resolution: 0.1mmHg

9. Fuel oil flow rate: 20 drops/9±1 second

10. Display mode: touch screen

11. Control method: small computer

12. Power supply: AC220V 50HZ

13. Ambient temperature: 10～40℃

14. Relative air humidity: <85%

15.New Falex heating tube Falex, the world’s long-established supplier of standard tribological test specimens

Main feature

1. Large-screen full-screen display, which can be operated intuitively and display the whole process interface of the test. The interface is simple, you can directly choose to set up the experimental mode, easy to use, the test process and supplementary data are all clear at a glance.

2. The main electronic equipment of the control department and supplementary department are imported to ensure the stability and stability of the instrument.

3. The instrument has self-diagnosis and alarm functions.

4. The instrument is equipped with a standard needle printer, which can realize the test results one by one.