Ul746a Glow Wire Flame Needle Burner Tester

Glow Wire Testing Machine

Glow wire tester is used for electrician, its components, parts, solid electrical insulation materials or other solid combustible materials, in line with GB/T5169.10~13, IEC60695-2-1/0~2-1/3, GB2099 , VDE 0620, GB4706, UL817 test standards.

Test method: Use a standard resistance wire ring to heat up to the specified temperature, and then make the glow wire and the test sample contact plug and socket rubber and plastic products under the test conditions.

Machine Parameter:

1. Maintain a pressure of 1N ± 0.2N between the glow wire and the test sample, and limit the press-in depth to 7±0.5mm

2. The application time of the glow wire to the sample Ta(T1) is adjustable from 0 to 99 minutes and 99 seconds. Generally according to the standard requirements

3. Set for 30 seconds (setting timer "30S00"), and there is a timer for measuring the ignition duration Ti (T2) and the flame extinguishing time Te (T3).

4. Dimensions (length x width x height):  113cm x 57cm x 120cm(Paint);

5. Studio volume: 0.5 cubic meters (other sizes can be customized)

6.Power supply mode: single phase

7.Operating voltage: AC 220V / 50Hz

1.After an order is placed, when will you send to us?
Generally about 7 days, If we have it on stock, we can arrange shipment within 3 days. 

2.What about the warranty with after - sales services?
12 months warranty. Besides, we can help you to repair your problem controller freely.

 
3.What about the services and product' quality?

Our products are widely recognized and trusted by users.All the products meet with: ISO, ASTM, AATCC, BS, EN, DIN, JIS and other requireable standards.

If you have any question, pls contact us directly.

Mob: 0086-13712874307
wechat/whatsapp:008613712874307

skype:Peter.liu560