GC2010 MD Transformer Oil Gas Chromatography System

GC2010 MD Transformer Oil Gas Chromatography System

Application:

Equipped with large LCD displayer, GC-2010 is a micro-computer controlled GC with programmed 8-grade temperature rising function. Adopted with the advanced technology, GC-2010 has the function of power off protection, over-temperature protection, "0℃" protection, non-gas protection, auto ignition, and etc.

It has the characteristics of reliable performance, compact design, convenient operation, and good expandability. It has the special function of temperature tracking for column. Its standard configuration is FID & TCD while with the expanding detectors like ECD, FPD, and NPD as well as methane transforming furnace. It is also capable of configuring FID amplifier.

Now GC-2010 has been widely used in the industries like oil, chemistry, pesticides, wine, environment protection, epidemic prevention, universities, scientific research and etc.

Main Features

1. Large-screen LCD display; rich and intuitive displaying content; convenient to set parameters.

2. Unique microcomputer automatic ignition device.

3. Stable and reliable digital zero setting to avoid baseline instability caused by the zero setting of potentiometer.

4. Have analysis acquisition automatic start function to seriously guarantee the synchronization of analysis and acquisition.

5. Sample injector adopts ration card to guarantee accurate sample injection and good repeatability.

6. Intelligent back pullout automatic cooling system with frequency conversion function; with fast cooling speed; achieve real near room temperature operation.

7. Column adopts unique tracking temperature rising to avoid detector contamination caused by rapid heating of column chamber .

8. With gas stopping/leaking protection and prompts functions; maximize the protection for TCD tungsten and column from damage.

9. Temperature control adopts Multichannel Integration Solid-State Relay to make temperature control stable and reliable.

10. Fault self-diagnosis function. At any time to show failure cause and alarm indication.

11. Adopt microcomputer control, keyboard setting, LCD display, with memory function.

 Working Environment

Temperature: 0~30℃
Relative Humidity: <85%
No Strong Electromagnetic Field
No Corrosive Gas
Stable Working Table without Vibration
Power Supply: AC220V±10%,50Hz±0.5Hz
Power Consumption: 2KW

Petroleum Products General Testers:

1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800
8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000
14.Multi-functional Vibration Tester VBT-2000
15.Automatic Potentiometric Titrator TP668
16.Petroleum Products Density Tester DST-3000
17.Petroleum Products Density Tester TP-109A
18.Karl Fischer Volumetric Water Content Titrator TPD
19.Distillation Range Tester DIL-201
20.Online Oil Quality Tester PTT-002
21.Liquid Phase Corrosion Tester TPS-05
22.Copper Corrosion Tester TP-113
23.Petroleum And Synthetic Liquid Anti-Emulsification Tester TP-122
24.Dew Point Tester DPME-P
25.Portable Chilled Mirror Dew Point Tester TP-1500

Insulating Oil Testers:

1.Fully Automatic Insulating Oil Dielectric Strength Tester IIJ-II
2.Fully Automatic Insulating Oil Dielectric Strength Tester DYT
3.Fully Automatic Insulating Oil Dielectric Strength Tester DYT-2
4.Three Cups Insulating Oil Dielectric Strength Tester IIJ-III
5.Six Cups Insulating Oil Dielectric Strength Tester IJJ-VI

Lubricating Oil Tester

1.Anti-corrosive Oil/Grease Salt Spray Corrosion Tester TP-0081
2.Air Release Value Tester TP-0308
3.Foam Characteristics Tester FC-892
4.Lubricating Oil High Temperature Foam Characteristics Tester SD-0722
5.Dark Petroleum Products Sulfur Content Tester TPC-120
6.Petroleum Products Aniline Point Tester TP-262A
7.Petroleum Products Ash Content Teter TP-508
8.Petroleum Products Chroma Tester TP-225
9.Petroleum and Synthetic Liquid Anti-emulsification Tester TP-122
10.Automatic Petroleum Products Carbon Residue Tester(Micromethod)CS-0625
11.Lube Oil/Grease Evaporation Loss Tester EL-7325
12.Lubricating Abrasion Tester LWT-2

Pre-sale service:

Professional pre-sale model/configuration selection advise and technical support -- offered by experienced technician.

Free on-site installation, debugging and technical training -- offered by strictly trained technology application engineers.

We build instrument service profile for our clients to record the product service and maintenance conditions.

After-sale service:

The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.

We guarantee the maintenance time no more than 3 working days and response time within 1 hour.

After instruments start service, we will pay follow-ups to collect the service conditions.

Chongqing TOP Oil Purifier Co., Ltd

Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc. On basis of mature development and manufacture technology and highly qualified production management team, the products have high quality, easy operation, excellent performance and long service life.