10 / 8f-g Gravel Pump Gravel Pump Manufacturer

10 / 8f-g gravel pump is a horizontal centrifugal pump with single pump shell structure, which is also a kind of slurry pump in a broad sense.

The detailed parameters are as follows:

Flow (q): 60-272l / s, 220-1000m3 / h

Head (H): 13-50m

Speed (n): 500-1000 rpm

Maximum efficiency: 45-65

NPSH R: 3-7.5

Suction diameter: 250mm

Discharge diameter: 200 mm

Maximum particle size: 178mm

Price: 64986 (this price is for reference only)

Structural features of 10 / 8f-g gravel pump:

1. Special clamp is used to clamp the pump body and cover. The outlet direction of the pump can be at any position of 360 degrees, so it is easy to install and use.

2. The bearing assembly of gravel pump adopts cylindrical structure, which is easy to adjust the clearance between impeller and pump body, and can be removed as a whole during maintenance.

3. The bearings are lubricated with grease.

4. There are three types of shaft seal for gravel pump: packing seal, secondary impeller seal and mechanical seal.

5. The main transmission modes are V-belt transmission, elastic coupling transmission, gear reducer transmission, hydraulic coupling transmission, silicon controlled speed regulation, etc.

6. Using a variety of speed and a variety of variants, so that the pump in the best operating conditions.

7. The gravel pump has wide flow channel, good cavitation performance, high efficiency and wear resistance. It has long service life, high operation efficiency and can meet many kinds of harsh transportation conditions.