Home > Products > Gate Valve > Bundor non rising stem ductile iron flanged GGG50 resilient seat Sea Water BS5163 Gate Valve
Bundor non rising stem ductile iron flanged GGG50 resilient seat Sea Water BS5163 Gate Valve
Negotiable
1 (Min. Order)
- T/T Credit Card
You May Like
-
Bundor 300MM Flanged Gate Valve Dimension Rising Stem Water Underground Gate Valve
-
Bundor Resilient Seat gate valve Flanged Ends dn100 pn16 handwheel Non ring stem soft seal gate valve
-
Bundor non risng stem gate valve double bonnet 2 inch 4 inch water flanged gate valve
-
Bundor 6 Inch ht200 dn80 pn16 gate valve with handwheel Water Non Rising Resilient Seat Flanged Gate Valve
-
Bundor 4 inch water gate valve DN250 Ductile Iron Gate Valve
-
Bundor DN50-600 Flange Wedge Gate Valve PN16 Hand Wheel Rising Stem Extension Stem Gate Valve
Product Description
Product Description
DIN 3352 F5 Resilient Seated Flanged Gate Valves
Features
1.The body is ductile iron,high level than national stanard.Tensile strength is 450Mpa,elongation is large than 10%,can not be broken easily when transport.
2. Both inner and out part is epoxy coating, the thickness is 250μm minimum,can prevent rust well,can be used in sewage system.
3.The wedge is coated with EPDM, the EPDM proportion can reach 50%,steable and good resilient;
4.3 O rings are used on 2Cr13 stem,can reduce friction,prevent leakage,can change sealing ring with stop water
5.The stem use brass, operate easily,prevent block
6.Every link, from workblank to the finished product packaging will be inspected strickly.
7.Bundor product quality is covered by China Pacific Insurance with two million dollors. Bundor Valve, Two Years Warranty, Pay Two Back If One Bad. Any quality problems of the product itself, we will pay without conditions.
2. Both inner and out part is epoxy coating, the thickness is 250μm minimum,can prevent rust well,can be used in sewage system.
3.The wedge is coated with EPDM, the EPDM proportion can reach 50%,steable and good resilient;
4.3 O rings are used on 2Cr13 stem,can reduce friction,prevent leakage,can change sealing ring with stop water
5.The stem use brass, operate easily,prevent block
6.Every link, from workblank to the finished product packaging will be inspected strickly.
7.Bundor product quality is covered by China Pacific Insurance with two million dollors. Bundor Valve, Two Years Warranty, Pay Two Back If One Bad. Any quality problems of the product itself, we will pay without conditions.
| Name | 1-Body | 2-Seat | 3-Wedge | 4-Stem | |
| Material | DI | EPDM | DI+EPDM | 2Cr13 | |
| Nominal Size | Inch | Face to Face Length F5 | PN16 | ||
| DN | NPS | L | ΦA | ΦB | ΦC |
| 50 | 2'' | 250 | 165 | 125 | 102 |
| 65 | 2 1/2'' | 270 | 185 | 145 | 122 |
| 80 | 3'' | 280 | 200 | 160 | 138 |
| 100 | 4'' | 300 | 220 | 180 | 158 |
| 125 | 5'' | 325 | 250 | 210 | 188 |
| 150 | 6'' | 350 | 285 | 240 | 212 |
| 200 | 8'' | 400 | 340 | 295 | 268 |
| 250 | 10'' | 450 | 405 | 355 | 320 |
| 300 | 12'' | 500 | 460 | 410 | 378 |
| 350 | 14'' | 550 | 520 | 470 | 438 |
| 400 | 16'' | 600 | 580 | 525 | 490 |
| 450 | 18'' | 650 | 640 | 585 | 550 |
| 500 | 20'' | 700 | 715 | 650 | 610 |
| 600 | 24'' | 800 | 840 | 770 | 725 |
| 700 | 28'' | 900 | 910 | 840 | 795 |
| 800 | 32'' | 1000 | 1025 | 950 | 900 |
| 900 | 36'' | 1100 | 1125 | 1050 | 1000 |
| 1000 | 40'' | 1200 | 1255 | 1170 | 1115 |
| 1200 | 48'' | 1400 | 1485 | 1390 | 1330 |
Company Information
View product categories
Visit our homepage
View product categories
Get the best quotation
About us
Packaging & Shipping
FAQ
Q:When the products will be shipped ?
A:Within 7-15 days after receiving the prepayment.
Q:Do you have OEM service ?
A:Yes . A variety of products size , quality and quantity can be cutomized according to your needs.
Q:Could you offer a free sample ?
A:Yes , samples can be proveded for free.
Q:How can I pay for the products ?
A: We accept a variety of payment methods. Such as T/T , L/C,D/P ,Western Union , Paypal ,Trade Assurance.
Q: How do you deal with that if there are some quality problems in products?
A: We will be responsible for all the quality problems.
Q:Are you a facrory or trade company ?
A: We are a factory with 26 years experience in valve research and production .
Click here for More Information
Contact Us
- Henan Bundor Flow Control Co., Ltd.
Product Categories
| Ball Valve | Brass Valve | Butterfly Valve | Check Valve |
| Gate Valve | Globe valve | Knife Gate Valve | Rubber Joint |
| Ungrouped | Valve Accessories | Y Strainer | Y Strianer |
New Products
-
Bundor 4" /DN100 flanged dn20 brass seal ggg50 class150 large diameter 300mm gate valve with prices
-
Bundor natural gas gate valve API 600 Ductile Iron manual Gate Valve 12 inch sluice gate valve
-
Bundor DN50-DN1200 Ductile Iron Sluice Valve Flange Gate Valve manual gate valve
-
Bundor PN16 DN50-1200 Gate Valve Price Sluice Gate Valve 10" gate valves price
-
Bundor class150 DN100 WCB wafer type knife gate valve manufacturer
-
Bundor DIN Standard Resilient Gate Valve Non Rising Stem Flange Gate Valve Dimension
-
Bundor 6 Inch 3 inch pn16 pn25 forged steel carbon steel rising stem Water Gate Valve Manual Slide Gate Valve
-
Bundor Non ring stem Gate Valve Lockout 10 Inch Gate Valve 10" gate valves price
-
Bundor DIN F4 Ductile Iron Non Ring Steam Soft Seal 4 inch 100mm gate valve
-
Bundor DN50-1200 GGG50 Resilient Seat 12 inch Sluice 200mm Gate Valve Price Dierct Buried Gate Valve
-
Bundor Ductile Iron Gate Valve For Water wheel Handle Non-rising stem Gate Valve
-
Bundor Non rising stem gate valve handwheel ductile iron dn200 flanged gate valve
-
Bundor Soft Seat Gate Valve DN100 Cast Steel Gate Valve
-
Bundor Valve Water Seal Gate Valve flange Gate Valve
-
Bundor ISO TS approved DN50-1200 ductile iron Flange Gate Vlaves
-
Bundor class150 4 wcb wafer knife gate valve manufacturer specification with prices list sluice valve
-
Bundor 1.5 Inch stainless steel flanged gate valves with price ggg50 Sluice Valve casting steel 100mm knife gate valve
-
Bundor 4" class150 DN100 WCB wafer knife gate valve supplier sluice
-
Bundor 4" WCB class150 slurry flange connection lug knife gate valve
-
Bundor DN50-1200(2"- 48") SS304 Stainless Steel Wafer Knife Gate Valve Price
-
Bundor class150 DN100 WCB wafer knife gate valve manufacturer wcb slurry knife gate valve
-
Bundor 8 Inch Slurry Flange connection casting steel lug knife gate valve actuator gate valve
-
Bundor Lungged Knife Gate Valve jis 10K Actuator Knife Gate Valve
-
Bundor SS304 Wafer Knife Gate Valve handwheel Operation Water Knife Gate Valve
Popular Searches
- expansion valve
- control valve
- refrigerant r134a
- refrigerant
- Air Conditioner Expansion Valve
- refrigerant gas
- ball valve
- temperature regulator
- Ball Accessory
- forged valve
- Clamp Cast Forged
- cleaning ball
- Clamp Spray Nozzle
- viton
- Butterfly Valve
- pipe thread
- temperature control iron
- Rocker Arm Assembly
- fire valve
- fire extinguishing agents
- Gate Valve
- Gas Control Valve
- Magnet Valve
- flow control
- water flow indicator
- flow valve
- Sample Valve
- freon gas
- gas regulator
- pressure regulator
Recommended Products
- 1/2Double outer wire ball valve,Fixed ball valve,Water heater ball valve,electroplateCopper ball valve，Kitchen ball valve
- 1/2Internal and external threaded ball valve， Gas professional ball valve，Kitchen gas fittings， Copper ball valve，Gas valve switch
- DN15Internal and external threaded ball valve， Gas professional ball valve，Kitchen gas fittings，Copper ball valve，Gas valve switch
- Vickers Solenoid Valve DG4V-3-2A-M-U-H7-60
- ATOS solenoid valve AGMZO-TERS-PS-10 210 I 54
- Vickers Solenoid Valve DGMFN-3-Y-A2W-41
- Vickers Solenoid Valve DG4V-3-2A-M-U-H7-60
- Yuken Hydraulic valve DSG-03-3C2-A220-50-50HZ
- Yuken Hydraulic valve DSG-01-3C60-D24-N1-50
- ATOS solenoid valve DKZOR-AE-171-S5 10
- Vickers Solenoid Valve DG4V-3-6C-M-U-H7-60
- Rexroth Gear Pump AZPF-11-011RCB20MB
Find Similar Products By Category
- Industrial Equipment & Components > Valve > Ball Valve
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Henan Bundor Flow Control Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile