oil port M14X1.5" dc 12volt hydraulic power unit for mini lift table with gear pump

oil port M14X1.5" dc 12volt hydraulic power unit for 

mini lift table with gear pump

General Description:

This POWER UNITS FOR ELECTRIC STACKER is equiped with a high pressure gear pump, a DC motor, a multi-funtional manifold ,values and a tank,etc. This power units features power up gravity down actions. Start the motor to lift the machine and the lowering movement is activated by the solenoid valve the lowering speed controlled by the pressure compensated flow control valve .The products are widely used in the industry of logistic devices such as fork lift ,mini lift table etc.

SPECIAL NOTES:

1. The duty of this power unit is S3,i .e.,30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concemed before mounting the power unit.
3. Viscosity of the hydraulic oil should be 15-68 cst,which should also be clean and free of impurities. N46 hydraulicoil is recom-mended.
4.This power units should be mounted horizontal.
5.Check the oil level in the tank after the first start of the power unit.
6.Oil changing is required after the initial 100 operation hours afterwards once every 3000 hours.

12V 800W 3650 RPM

PALLET TRUCK POWER UNITS

1.12v 0.8kw 3650rpm 0.5cc/r

2.12v 0.8kw 3650rpm 0.75cc/r

3.24v 0.8kw 3650rpm 0.5cc/r

4.24v 0.8kw 3650rpm 0.75cc/r

MINI POWER UNITS FOR MEDICAL CARE EQUIPMENT

POWER UNITS FOR MANUAL ELECTRIC STACKER

1.12V 0.8KW 3650RPM 0.5CC/R

2.24V 0.8KW 3650RPM 0.5CC/R

3.12V 1.6KW 2500RPM 1.6CC/R

4.12V 1.6KW 2500RPM 2.1CC/R

5.24V 2.2KW 2500RPM 2.1CC/R