electric -basketball stands power units with 220v ac motor HPU-27GKDLEHCFHG

electric -basketball stands power units

 with 220v ac motor

General Description:

This ELECTRIC-BASKETBALL STANDS POWER UNITS is designed exclusively for the electric-basketball stand, consisting of two independent, typical "power up, gravity down" circuits for the up and down movements of the basketball board and the whole basketball stand.The pressure switch will stop the motor once the basketball or the whole stand is completely lifted. The pressure-compensated balance valves make the lowering movements very smooth.

SPECIAL NOTES:

1. The duty of this power unit is S3,i .e.,30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concemed before mounting the power unit.
3. Viscosity of the hydraulic oil should be 15-68 cst,which should also be clean and free of impurities. N46 hydraulicoil is recom-mended.
4.This power units should be mounted horizontal.
5.Check the oil level in the tank after the first start of the power unit.
6.Oil changing is required after the initial 100 operation hours afterwards once every 3000 hours.

12V 800W 3650 RPM

PALLET TRUCK POWER UNITS

1.12v 0.8kw 3650rpm 0.5cc/r

2.12v 0.8kw 3650rpm 0.75cc/r

3.24v 0.8kw 3650rpm 0.5cc/r

4.24v 0.8kw 3650rpm 0.75cc/r

MINI POWER UNITS FOR MEDICAL CARE EQUIPMENT

POWER UNITS FOR MANUAL ELECTRIC STACKER

1.12V 0.8KW 3650RPM 0.5CC/R

2.24V 0.8KW 3650RPM 0.5CC/R

3.12V 1.6KW 2500RPM 1.6CC/R

4.12V 2.1KW 3650RPM 2.1CC/R