ASTM B399 Standard AAAC AAC ACSR CABLE CONDUCTOR 30.58/77.47/77.47/123.3/BUTTE KCM

1.Application:

Used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives AAAC aluminum conductor higher resistance to corrosion than ACSR aluminum wire stranded.

2.Construction

Standard 6201-T81 high strength aluminum conductors, conforming to ASTM Specification B-399, are concentric-lay-stranded, similar in construction and appearance to 1350 grade aluminum conductors. Standard 6210 alloy conductors are similar to other alloy conductors commercially known as Ardival, Aldrey or Almelec. They were developed to fill the need for an economical conductor for overhead applications requiring higher strength than that obtainable with 1350 grade aluminum conductors, but without a steel core. The DC resistance at 20 °C of the 6201-T81 conductors and of the standard ACSR of the same diameter are approximately the same. Conductors of the 6201-T81 alloys are harder and , therefore, have a greater resistance to abrasion than conductors of 1350-H19 grade aluminum.

3.Specification

AAAC bare conductor meets or exceeds the following ASTM specifications:

B-398 Aluminum Alloy 6201-T81 Wire for Electrical Purposes

B-399 Concentric-Lay-Stranded 6201-T81 power transmission lines

ASTM B-399 AAAC CONDUCTOR 

Resistance is calculated using ASTM standard increments of stranding and metal conductivity of 52.5% IACS, AC resistance at 60Hz

Current ratings are based on 75°C conductor temperature, 25°ambient,2ft/s wind, 96/watts/sq.foot sun,.05 coefficients of emissivity and absorption.

Contact Us

Henan Huaxing Wires And Cables Co., Ltd.

Contact nameNNN

Chat Now

• *Email
  Please enter Your valid email address.
• *To

  

  NNN
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now