twin conductor electrical 230v floor heater mat twin conductor floor heating mat system 150wm2 80wm2

Product Model

Product Application

Heating mat is a good heating system. It is easy to install for a variety of floor coverings, whether concrete, wood or old tile or terrazzo It is installed with tile adhesive and has almost no effect on the ground elevation. Heating matcan also be laid directly on the original ground without the need for other treatment of the original ground. In addition,the thin, pre-heated layer gives you the desired floor temperature in 20-30 minutes after starting the system, so this fastheating system is the best choice for home makers like bathrooms. Heating mat used for overall heating, comfortable heating, wall heating,Indoor high-level demanding and the second decoration. Heating mat are divided into single-conductor in-slab snow melting heating mat and twin conductor in-slab snow melting heating mat.

1. Ground heating system for public buildings and residential buildings;

2. Bathroom floor warming system;

3. Concrete floor, wooden floor or tile floor heating;

4. Driveway snow melting or ice antifreeze system.

Technical Parameter

Installation

1. Laying the insulation broad on the ground; keep the ground dry before install;

2. A special reflective film is placed on the insulating material to reflect heat;

3. Put on the heating mat, and there is adhesive on the back of the heating mat net, which can be attached to the ground material. The whole installation process is much easier and faster.The floor mat is only 3-5mm thick, and has little influence on the height of the floor. The position such as closestool or platform basin can avoid;

4. Uniformly covered with concrete materials, the thickness of the cover shall refer to the heating standards, and the construction can be carried out with professional tools;

5. Install the thermostat and finally place floor or ceramic tile and other floor decoration materials.

Warning

Product Advantages