VU-2Y Metal Impact Specimen Gap Broaching Machine with Hydraulic Automatic

VU-2Y Metal Impact Specimen Gap Broaching Machine

Contact: Jessica Jia Skype: jessica-hssd

1. 1. Application

The machine is special processing equipment "metal Charpy notched impact test method" in the impact of the sample produced V-and U-requirements and developed according to GB / T229-2007, fully meet GB229-2007, ASTM, E23-02a, indicators specified in the standard EN10045, ISO148, ISO083 and so on.

1. 2. Descriptions:

The machine consists of working parts, hydraulic drive parts, electrical control, lubrication and cooling section, and other auxiliary section. Random configuration 2mm V type and 2mm U type broaches, a notch forming, one time can successfully draw two standard notch, broaches the use of special materials, special technology precision manufacturing, high hardness, wear resistance, long service life.

1. 3. Main structure:

3.1 Host working part: Broach spud the machine is versatile, according to the special needs, it can be easily replaced by other special notch special broach;

3.2 host driver part: the bench-button control cylinder so that the seating and broach broaches broaching a reasonable speed 2.5m / min vertical movement;

3.3 power transmission, with the load stable, low noise, the advantages of self-lubricating, 

also has overvoltage protection;

3.4 electrical control: With automatic stop characteristics, to ensure the efficiency and safety of use.

3.5 lubricating and cooling parts: machine tool cooling pump oil, the design of fuel adjustment device, you can easily adjust the oil flow direction and size, cooling pump out the oil after the throttle, sent to the rail for lubrication;

3.6 Host auxiliary section: lubricating oil filter, collecting scrap iron and other auxiliary equipment, to ensure safe and efficient processing, while inside the machine environment is clean, iron easy to remove.

4. Main Technical Specifications:

1. 5. Main configuration:

5.1 main host--------------------------------------- 1 set

5.1.1 High-performance gear pump ------------------- 1 set

5.1.2 Three-phase asynchronous motors------------- 1 set

5.1.3 Three four-way reversing solenoid valves---- two pieces

5.1.4 Relief--------------------------------------------------- 1 set

5.1.5 One-way valve--------------------------------------- 1 set

5.1.6 Precision filter---------------------------------------- 1 set

5.2 Broaches--------------------------------------- 2 pieces

5.2.1 V-type broaches (already installed in the host) --- 1 set

5.2.2 U type broaches (already installed in the host) --- 1 set

5.3 Electric control system------------------------ 1 set