600/1000V Metal Clad MC armored cable MC/BX cable 12/2 Aluminum interlocking Armour Cable

Item name: 600/1000V Metal Clad MC armored cable MC/BX cable 12/2 Aluminum interlocking Armour Cable.

Application:
As 600 volt Type MC cable rated 90oC in wet or dry locations; for install- ation aerially, in metal rack, trough, cable tray, or direct buried; for power and control circuits not exceeding 600 volts in manufacturing and process- ing plants, substations and generating stations. May be used in NEC Class l and ll, Div. 2 and Class lll, Div. 1 and 2 hazardous locations.

Construction:
Three conductors of stranded uncoated copper, Rome-XLPE (crosslinked polyethylene) insulation, surface print phase identification, twisted with one uncoated copper grounding conductor, suitable fillers, binder tape, PVC inner jacket, aluminum or galvanized

1. Scope:
   This specification describes three conductor Rome-XLPE (thermosetting crosslinked polyethylene) insulated, aluminum or galvanized steel interlocked armor Type MC power cable having PVC jackets under and over the armor for use in circuits not exceeding 600 volts phase-to-phase at conductor temperatures of 90oC in wet or dry locations for normal operation, 130oC for emergency overload conditions and 250oC for short circuit conditions. Cables are intended for installation indoors or outdoors, aerially, in metal rack, trough or cable trays, or for direct burial.
2. Standards:
   The following standards shall form a part of this specification to the extent specified herein:
   ICEA Pub. No. S-95-658, NEMA Pub. No. WC70 for Nonshielded Power Cables Rated 2000 Volts or Less.
3. Conductors:
   Class B stranded annealed uncoated copper per Part 2 of ICEA.
4. Separator:
   A suitable separator over the conductor may be used at the option of the manufacturer.
5. Insulation:
   Shall be Rome-XLPE crosslinked polyethylene meeting the requirements of ICEA Table 3-7, Type X-2 and Type XHHW-2.
6. Phase Identifacation:
   Insulated phase conductors shall be printed with the numerals “1”, “2” and “3” on the surface of the insulation.
7. Assembly:
   Three phase conductors shall be cabled together with a Class B stranded, uncoated copper grounding conductor and suitable nonhygroscopic fillers to make round. Length of lay shall not exceed 35 times the phase conductor diameter. A suitable non- hygroscopic cable tape shall be applied over the assembly.
8. Inner PVC Jecket:
   Shall be PVC meeting the requirements of ICEA Table 4-1 and the Sunlight Resistant requirements. Average jacket thickness shall be standard. Minimum thickness at any point shall be not less than 70% of the specified average thickness.
9. Armor:
   Aluminum or galvanized steel interlocked armor shall be applied over the inner PVC jacket.
10. Outer PVC Jecket:
    Shall be PVC meeting the requirements of ICEA Table 4-1 and the Sunlight Resistant requirements. Minimum thickness at any point shall be not less than 70% of the specified average thickness.
11. Identifacation:
    An ink print legend shall be applied to the surface of the PVC outer jacket providing cable and manufacturer identification.

600/1000V Metal Clad MC armored cable MC/BX cable 12/2 Aluminum interlocking Armour Cable.

1. 100 to 1,000m reeled in carton drum or according to customers' requirement.
2. Outer packing: wooden case, carton box.
3. Other packing requirement according to client's request.

600/1000V Metal Clad MC armored cable MC/BX cable 12/2 Aluminum interlocking Armour Cable.

1. We guarantee to offer new advanced goods.

2. We'd like to send skilled personnel to the installing place to help offer technical consultant, quantity estimation and instruction, installing, preliminary testing,and help start up running; and to answer for any defect of the product found in installing and run testing, If there's something wrong with the product, we'll give our answer within 12 hours and get to the spot within 36 hours.

3.After installaton, We'll send skilled personnel to have the preliminary test and answer for any problems emerged. We take the whole charge of the fee needed in repairing,testing or retesting within the scope of our duty required in contract.

4.During the contract's period of validity,of the project must be started all over again or the goods can not be used at all which is resulted from our faulty goods and improper files or mistakes made by our instructors, we'll change the goods at once without compensation and take charge in all expenses of reinstallation.

Henan Huadong Cable Co., Ltd is a joint stock enterprise integrated incable production, research & development,

1.what is our payment term ?