Home > Products > DWDM > Passive product DWDM Mux Demux 100G 40CH Arrayed Waveguide Grating for WDM Network
Passive product DWDM Mux Demux 100G 40CH Arrayed Waveguide Grating for WDM Network
You May Like
-
Mini 1x4 OptoMechanical Fiber optical Switch
-
2x2 Mechanical Automatic Optical Switch Module Passive Component
-
4slot Rack Mout 100 Ghz 8 Channel DWDM
-
LGX Cassette Optical Multiplexer And Demultiple 1510~1570nm Wavelength
-
16CH Wave Division Multiplexer
-
100GHz 32CH DWDM Mux Demux C - Band ITU Grid For Passive DWDM System
Product Details
Brand Name | GEZHI or OEM | Model Number | GAWG-40CH |
Product Description
40 CH 100G AWG Module
Arrayed Waveguide Grating for WDM Network
GEZHI Photonics offers a full range of AWG products, including 50GHz, 100GHz and 200GHz AWG. Here we present the generic specification for the 40-channel 100GHz AWG MUX/DEMUX component supplied for use in DWDM system
This component is designed for use within the C -band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the AWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the AWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor.
Applications:
?WDM transmission
?WDM-based ADM
?Wavelength selective routing
?Optical signal processing
Features:
?Narrow and accurate channel spacing
?Large channel number
?Polarization insensitivity
?High stability and reliability
Ordering Information:
AWG | X | XX | X | XXX | X | X | X | XX |
Band | Number of Channels | Spacing | 1st Channel | Filter Shape | Package | Fiber Length | In/Out Connector | |
C=C-Band L=L-Band D=C+L-Band X=Customize | 16=16-CH 32=32-CH 40=40-CH 48=48-CH XX=Special | 1=100G 2=200G 5=50G X=Special | C60=C60 H59=H59 C59=C59 H58=H58 XXX=special | G=Gaussian B=Broad Gaussiar F=Flat Top | M=Module R=Rack X=Special | 1=0.5m 2=1m 3=1.5m 4=2m 5=2.5m 6=3m S=Specify | 0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=LC/APC 6=LC/PC 7=ST/UPC S=Specify |
Optical Specification (Flattop AWG)
Parameters | Condition | Specs | Units | ||
Min | Typ | Max | |||
Number of Channels | 40 | ||||
Number Channel Spacing | 100GHz | 100 | GHz | ||
Cha. Center Wavelength | ITU frequency. | C -band | nm | ||
Clear Channel Passband | ±0.1 | nm | |||
Wavelength Stability | Maximum range of the wavelength error of all channels and temperatures in average polarization. | ±0.05 | nm | ||
-1 dB Channel Bandwidth | Clear channel bandwidth defined by passband shape. For each channel | 0.4 | nm | ||
-3 dB Channel Bandwidth | Clear channel bandwidth defined by passband shape. For each channel | 0.6 | nm | ||
Optical Insertion Loss at ITU grid | Defined as the minimum transmission at ITU wavelength for all channels. For each channel, at all temperatures and polarizations. | 4.5 | 6.0 | dB | |
Adjacent Channel Isolation | Insertion loss difference from the mean transmission at the ITU grid wavelength to the highest power, all polarizations, within the ITU band of the adjacent channels. | 25 | dB | ||
Non-Adjacent, Channel Isolation | Insertion loss difference from the mean transmission at the ITU grid wavelength to the highest power, all polarizations, within the ITU band of the nonadjacent channels. | 30 | dB | ||
Total Channel Isolation | Total cumulative insertion loss difference from the mean transmission at the ITU grid wavelength to the highest power, all polarizations, within the ITU band of all other channels, including adjacent channels. | 22 | dB | ||
Insertion Loss Uniformity | Maximum range of the insertion loss variation within ITU across all channels, polarizations and temperatures. | 1.0 | 1.5 | dB | |
Directivity(Mux Only) | Ratio of reflected power out of any channel(other than channel n)to power in from the input channel n | 40 | dB | ||
Insertion Loss Ripple | Any maxima and any minima of optical loss across ITU band, excluding boundary points, for each channel at each port | 0.5 | dB | ||
Optical Return loss | Input & output ports | 40 | dB | ||
PDL/Polarization Dependent Loss in Clear Channel Band | Worst-case value measured in ITU band | 0.3 | 0.5 | dB | |
Polarization Mode Dispersion | 0.5 | ps | |||
Maximum Optical Power | 23 | dBm | |||
MUX/DEMUX input/ output Monitoring range | -35 | +23 | dBm |
IL Represents the worst case over a +/-0.1nm window around the ITU wavelength
PDL was measured on average polarization over a +/- 0.1nm window around the ITU wavelength.
MODEL NUMBER:
Contact Us
- Gezhi Photonics Co., Ltd
Product Categories
CWDM | DWDM | Optical Switch |
New Products
-
D2x2B Multimode Optical Switches 850nm Dual 2x2 Bypass , Fiber Optic Switches
-
2x2B Opto - Mechanical Fiber Optical Switches Optical Bypass Switch
-
Dual 2x2 Multi Mode Mechanical 4x4 Fiberoptic Switch ( Latching Or Non Latching )
-
Low Temperature 32ch Athermal AWG DWDM
-
Micro 1x1 Mechanical Fibre Optical Switch Module SM 3V Latching Module
-
Duplex 1x16 CWDM Module
-
LC/PC Connector 1x2 Mechanical Optical Switch Low Insertion Loss
-
100Ghz Fiber Dense WDM Multiplexer
-
2:1 Optical Protection Switch
-
1x2 100Ghz / 200Ghz DWDM Mux Demux For Fiber Optical Components
-
8CH Coarse WDM filter
-
8CH CWDM Mux Demux CCWDM Module Compact Coarse Wavelength Division Multiplexer
-
Passive 32 Channel AAWG DWDM Splitter No power required
-
Micro 1x1 Mechanical Optical Switches 850nm or 1260~1650nm configurable OADM
-
3 Port FWDM Filter CWDM Mux Demux Pass 1490nm Reflect 1310 / 1550nm
-
Planar DWDM Components 40 Channel 100G Athermal AWG
-
2x4 Multimode 850nm Fiberoptic Switches
-
CWDM Filter 1x2 Fiber Optical Bare Cwdm Multiplexer With Steel Tube
Popular Searches
- patch cord
- fiber optic equipment
- fiber optic attenuator
- optical multiplexer
- optical module
- cwdm
- dwdm
- optical filter
- fiber optic transceiver
- pdh
- video fiber optic transmitter
- fiber optic video converter
- fiber optic video transmitter
- fiber optic video transceiver
- pdh multiplexer
- fiber optic transmission
- cwdm mux demux
- demux module
Recommended Products
- Oven Protection Sleeve , Fiber Optic Heat Oven Sleeve
- 1x32 MEMS optical switch
- 1X24 MEMS Fiber Optical Switches
- 1X24 MEMS optical switch module -xionghua
- 1550nm 1X16 MEMS optical switch
- 1X16 MEMS optical switch module
- SM 1X4 MEMS optical switch
- 1310nm 1X4 MEMS optical switch module
- 1550nm 1X8 MEMS optical switch module
- MEMS 1x8 Fiber Optical Switch —xionghua
- DC-BLOCK DB-4310FM-6
- F/UTP Cat.6A Patch cord 23AWG 7*0.2 LSZH - 2m
Find Similar Products By Category
- Electrical & Electronics > Telecommunication & Broadcasting > Fiber Optic Equipment

Product Tags:
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.

- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile