thread connection stainless steel 3 ways angle seat valve

Angle seat valve Strength:

50% more economical than ball valves

600% longer service life than ball valves

Zero leakage with pilot air 1million cycles

Maintenance-free actuator with long-life piston ring

Shock free opening with 40% less air consumption

50% higher flow rates than the globe valves

Compact design and fast response

Water hammer free (flow below seat)

Easy to install with rotary degree 360

Four connections thread/welding/flange/clamp

Our pneumatic valves are applicable for:

1.Food and Beer beverage filling equipment 

2.2.Pharmaceutical and medical equipment

3.Water and Sewage treatment equipment 

4.Gas industry

5.Printing and dyeing textile,foam machinery

6.Chemical industry. High temperature sterilization

7.Petroleum industry.

ntrol of solvents, steam, vacuum

9.Industrial washing equipment and solvent recovery systems 

10.machine tools and control of coolant agents

Angle Seat Valve Specification

Fluid Pressure: 0~1.6Mpa

Control Pressure: 4~8Bar

Control Gas: Neutral Gas Or Air

Body Material : CF8/304、CF8M/316

Seals Material : PTFE

Actuator Material:CF8/304、Polyamide Pa、Aluminum Alloy

Medium Temperature: -20°C~+180°C、+25°C~+220°C

Working Temperature: -20°C~+80°C

Medium Viscosity ≤600mm2/s

Control Type: Single Function Normally Closed,Single Function Normally Open,Double-Acting,Manual

Connection: Threaded(BPS,NPT),Welding , Tri-Clamp, Flange

Applicable Medium: Water,Alcohol,Oil,Feul,Steam,Neutral Gas Liquid,Organic Solvent,Acid And Alkali Solution

Optional Accessories: Proximity Switch,Solenoid Valve,Manual Limit,Intelligent Positioner