Electric Auma Actuato /Auma Electric Actuator

Electric Auma Actuato /Auma Electric Actuator                                       

Temperature of Media:Pressure
Media:Water, Oil, Gas
Power:Electric
Material:Stainless Steel
Pressure:Medium Pressure

Features of the introduced series
The introduced new generation of intelligent model
Cut-off signal protection
Over-torque of two- way protecting function
Auto switch function
The pros and cons of switch function
Dynamic braking
Servo-motor with double protection and high-efficiency
Stronger anti-interference function
Demonstration: OA-10/ voltage travel time mounted model control model
Supply voltage: K: 220VAC, F: 380VAC,
Travel time: Sees the table
Mounted model: Z: Direct-mounted, H: Foot-plate,
Control model: L: Two types, switch, switch quantity input, abbreviation: Integral-model and proportional modulating type, 4---20mA input
S: Separated-model and proportional modulating type, 4---20mA input
Y: Remote-control type, the switch quantity input
The main technical parameters of the electric actuator
The following technical parameters are mainly applied to the proportional modulating type electric actuator. Item1, 2, 3, 4, 5and 6 are not suitable for the remote-control type electric actuator and switch type electric actuator.

1. The input signal: 4--20mA DC
2. The input resistance: 250 ohm
3. Input passage: 1
4. Basic error: 1%, 2.5%
5. Deviation: 1.5%
6. Deadline: 0.5%--3% continuously adjustable
(according to the indication of system)
7. Damping characteristic: No-oscillating
8. Power supply: Three-phase 380V~50Hz, single-phase 220V~50Hz for selected
9. Working conditions: Temperature: Integral-type -10-- +55, separate-type -25 -- +70
Humidity: ≤ 85%The surrounding air does not have the corrosive elements
10. Protection rank: It conforms to the IEC145 IP65 standards. (Excluding the separate-type GAMX with waterproofing and dustproof functions fixed in rooms), bus type and intelligent type IP67.
11. The cut-off signal protection: It can be divided into all-on, all-off and home position according to your instructions.
Generally it is set into the home position when it is manufactured

Specification                                                                                                  

Dimensions                                                                                 

(mm)

Picture                                                                                                           

small brass and plastic non return valves solenoid gas valve

 solenoid gas valve  

Skype:atcgogo