Industrial high temperature muffle furnace, resistance furnace, kenton industrial machinery laboratory brand manufacturers

The furnaces are used in the laboratory, industrial and mining enterprises, scientific research for elements determination, heating treatment of small steel parts and other metal parts, and high temperature heating treatment of metal and ceramic sintering, dissolution, analysis and so on.

Installation

1.After open the package, check it whether is intact, and the furnace should be placed on the flat ground , protect the temperature controller from vibration.

2.Install the power switch to control the power supply. In order to ensure safe operation , the furnace and temperature controller should be connected with protective conductor thermal 

3.Check the wire connection, close lid again. then connect the power, adjust the temperature adjustor to “set”, set needed temperature. When it displays needed temperature, Green light is on, it means that heating starts .then dial to “measure”, it displays the actual temperature. and ammeter displays the corresponding value according to the power (8-10). meanwhile the temperature rises, when the temperature reaches setting value, controller will disconnect power supply automatically, red light is on or ammeter in the position of “0”, it means that heating stops. then “red” and “green” light of temperature controller will work alternately, to reach constant temperature 

Note: When equipment is running for the first time, the temperature will soar(red light is on or ammeter in the position of “0”, but temperature keeps rising), but will be back later

more:/muffle-furnace/20170602/37.html