silicone clothes heat embossing press machine

silicone clothes heat embossing press machineTechnical Parameters

Technical Parameters

silicone clothes heat embossing press machine

Machine Name	silicone clothes heat embossing press machine
system	hydraulic
Heating plate	with heating up and bottom
Work station	double station
Stroke	110mm
Main cylinder diameter	80mm
Horse	4.5hp
Heating plate size	300*400mm
Other Available Size	Custom size by your special order
heat power	7.2kw
Voltage	220V,single phase
machine size(L*W*H)	795*1195*1800MM
Weight	600KG

 

application:silicone clothes heat embossing press machine
1. T-shirt trademark embossing;
2. Denim embossing;
4. Microfiber fabric/gloves silicone trademark/silicone thermal transfer;
5. Silicone bracelet embossing hot pressing;
5. Thermal transfer and bronzing of ready-to-wear/knit fabric/shoes

Process of silicone Embossing:silicone clothes heat embossing press machine

1.stroke adjust between heating plates,Adjuster of distance: the distance of both plates is can be controlled according to material and the thickness of pattern.

2.silicone and catalyst mixing,mixing as the ratio,for fix mold on heating plate and fabric prining

2.filling silicone on molds.Set the position for molds you will stick to the heating platen,male mold on the top, female mold on the bottom.Start machine hot pressing,time: 90s

(tips: avoid fabric sticking on mold,apply some detergent on mold
fabric embossing time: 8s-12s)

3.printing tools: Screen Printing Scraper+printing frame

printing the silicone

on back side of fabric(screen printing),Preheat the machine. Set the temperature between 180-235℃,and the time about 12sec.

4.Make the heating platen press down.After 12 sec. it will auto release.

5.Use the machine to do the embossing.