High Temp Air Source Heat Pump(CE, CB, EC, ETL, CETL, C-TICK, WATER MARK, STANDARD MARK, UL, SABS, SANS, SAA, REACH)

High Temp Air Source Heat Pump

PHNIX EVI Air Source Heat Pumps are EVI design for 60^oC higher water temperature, especially for the extremely cold area, like -25^oC ambient temperature; Its core philosophy is to solve the house heating during the cold climate in Winter and Spring and make room cooling in hot Summer and Autumn. This kind of design can do not only heating and cooling but also can provide sanitary hot water all over the year because the second circle heating can use 60^oC hot water to heat the 10~15 ^oC tap water to 55 ~60 ^oC sanitary water. So it is realized to offer heating,cooling and sanitary hot water with only one heat pump.

The heat pump performance has been improved greatly with Copeland new designed EVI compressor from the United States Emerson Ltd and with Phnix specially designed economizer and high efficiency heat transfer module.With six months of performance testing and validation in the different conditions of Multifunctions Lab., PHNIX EVI Air Source Heat Pumps have reached the COP=4.2  for floor heating mode (EN14511-2: 2011) and it is available for 60 ^oC hot water output and safely working in -25 ^oC ambient temperature.

FEATURES

1) EVI compressor special designed for high water temperature

2) Base frame and externel panels made of galvanized powder coated steel

3) Water exchanger equipped with high efficiency tube in shell heat exchanger

4) Reliable compressor with R407C refrigerant

5) Stable water flow switch

6) Fully sealed control box with water proof level IPX4

7) Intelligent controller and adjustment by quick-mind microprocessor

8) Air exchanger (fin-coil) with hydrophilic coating

9) Thermostatic heating element for evaporator anti-frosting protection

10) Thermostatic or eletrical expansion valve

11) Electrical heating element inside as back up for emergency

12) Automatic defrosting function included(with reverse valve inside)

13) Grundfos water pump installed inside

14) Low noise fan motor

15) The request water temperature can be auto-adjusted with the ambient temperature

CERTIFICATIONS

CE, CB, EC, ETL, CETL, C-TICK, WATER MARK, STANDARD MARK, UL, SABS, SANS, SAA, SASO, VDE, RoHS, REACH, EN14511-2:2011, EN14511-2:2007, NFPAC, EURO-VENT, ENERGY-STAR, DOE, ISO9001, ISO14001, Six Sigma, Lean Production and Management