HTG-1 TGA thermogravimetric analyzer

HTG-1 TGA thermogravimetric analyzer

Features

1. The country's smallest integration equipment, signal loss is small, little interference.

2. Samples above the instruments, easy to operate.

3. The thermal inertia of the heating furnace of miniaturization, starting can be linear temperature, temperature control by microcomputer software PID algorithm, PID control system is more accurate than hardware.

4. Improve the three-way voltage stability, steady flow control system, the atmosphere can transform gas species in the experimental process.

5. From the trace sample to large sample all can meet.

6. Increase air conditioning, can make the thermal buoyancy caused in the process of heating surface to minimize weight.

7. Intelligent software and hardware design, measurement process is done automatically, and automatically drawing, use of software function can complete conventional data in each other; Special data processing; Kinetic parameters are calculated; Data comparison).

8. In the process of the intelligent system to collect sample, according to the size of the output signal can be transformation range.

9. The only can be used by the user standard sample temperature, thermal weight each calibration instruments, reduce the error of instrument.

10. The USB or serial communication interface, convenient to connect to the laptop.

11. A powerful and flexible software automatically control temperature, user friendly interface, has a wealth of data analysis and can be flexible to set temperature program.

Technical Parameters

Temperature range: HTG - 1 - - 1150 degrees at room temperature, HTG 2 at room temperature and 1450 C

Temperature accuracy: plus or minus 0.3 DEG C

The heating rate: 0.315 DEG /min and 80 DEG /min

Balance measuring range: 1 mg, 200 mg

Balance sensitivity: 0.1ug

Measuring range: + 10UV + 1000uv

Vacuum degree (the instrument itself with vacuum sealing measures) optional vacuum unit can reach 2.66-2Pa

Crucible: volume is about 0.06ml