Forney Fire Detector IDD 9000

Forney Fire Detector IDD 9000

Nanjing Win Union Automation and Control Technology Co., Ltd.

Sales : Tonny 

skype:yluedq qq:994274685

TEL: ( 86-25)-52791167   52791168

FAX: ( 86-25)-52791169

E-mail:  njxj888@163.com    

Add: Jiangning Shuanglong Avenue No.1222  Nanjing, Jiangsu. China 211100

Reliable flame detectors (oil, coal and lignite flames)

FORNEY IDD-II Intelligent Dynamic Flame Detector enables accurate detection and identification of oil flames, coal flames and lignite flames.

The IID-IIU flame detector is used to detect oil flames and coal flames. The IID-IIL flame detector is used to detect lignite flames.

The IDD-II Intelligent Dynamic Flame Detector is used in conjunction with the FORNEY Fire Detection Amplifier DR-6161E, DR-6101, RM-IDD, IDD-IIIA. When the IDD-II flame detector detects the flame, its hardware circuit amplifies the ripple voltage signal generated by the sensing element, and the amplified signal is transmitted to the amplifier via a four-core shielded cable. The amplifier processes the signal and outputs the signal to the burner management system.

The electronic devices of the flame detector are enclosed in a cast aluminum housing. The amplifier periodically performs a self-test to determine if the flame detector is working properly.

Features:

1. Lead sulfide photoelectric sensor:

Infrared and visible light for oil, coal and lignite flames.

2. Dynamic flame detection circuit:

Only produce a dynamic flame signal, without detecting heat radiation.

3. Simple and durable structure:

The circuit board and the sensing element are enclosed in a cast aluminum housing as a replaceable part.

4. Easy installation and maintenance:

Fast electrical and mechanical contact, easy installation and maintenance.

5. FM certification

IDD-II intelligent dynamic flame detector

Product and installation accessories

IID-II has filters (coal and # 6 oil)

IID-IIU no filter (# 2 oil and gas)

IID-IIU no filter (# 2 oil and gas)

Forney Fire Detector IDD 9000

The IDD 9000 Flame Detector Amplifier provides enhanced identification and tuning for NFPA-compliant systems and a single retrofit solution for multiple discrete legacy amplifiers.

Products and accessories:

Dual Channel Panel Mount (PM) IDD 9000 Amplifier Part Number 408100-00

Single Channel Panel Mount (PM) IDD 9000 Amplifier Part Number 408100-50

Rackmount (RM) IDD 9000 Amplifier - Dual Channel Part No. 408120-01

Amplifier Tuning Kit Part Number 408103-01

Termiflex /SMARTDisplay? terminal with 9-pin connector * part number 408106-01

Cable 40' (for IDD) part number 399854-04

Cable 40' (for UV-4) part number 399855-04

Compatible flame detectors:

IDD-II, filter, infrared detector part number 38321-21

IDD-IIU, unfiltered, infrared detector part number 38321-22

IDD-IIL, infrared detector for lignite component #38321-23

UV-4, UV tube detector part number 379189-02

*If using an old Termiflex /SMARTDisplay? terminal with a 25-pin connection, a DB25 pin to DB9 pin adapter is required (Forney Part#408107-01)

IDD 9000 specifications:

Panel Mount: Rack Mount:

Dimensions: 10 1/2" x 7 7/8" x 3 7/8" (26.6 cm x 20 cm x 9.8 cm) 6.5 x 14 x 1.75 inches (155.6 x 355.6 x 44.5 mm)

Weight: 5 pounds. 3 oz, 1 lb, 7 oz

Temperature: 32° to 140°F (0° to 60°C)

Humidity: 5% to 95% relative humidity, no condensation

Power requirements: 120/240 VAC, 50/60 Hz @ 12 VA

Output relay rating (SPDT): 125 VAC, 3 A at 250 VAC and 30 VDC.

There are 3 relays (bulb, main flame and alarm) for each channel.

Flame intensity: 4-20 mA or 0-10 VDC (purchasing)

Flame Fault Response Time (FFRT): 2.0, 3.0 or 3.8 seconds

Flame picking time: less than 2 seconds

Non-volatile RAM: 8 complete operational profiles

Approved: Factory Mutual (FM)