hengzhong factory direct sale union rubber joint

Introduction to rubber wire thread joint:
Wire buckle rubber joint is also known as rubber soft joint, rubber joint, shock absorber, pipe shock absorber, shock absorber, soft joint, etc., is a kind of high elasticity, high air tightness, medium resistance and weather resistance pipe joint.
Installation method of rubber wire thread joint:
Advantages of wire thread rubber joint:
1, small size, light weight, good flexibility, easy installation and maintenance.
2, the installation can produce transverse, axial, angular displacement, not by the pipe impaction, flange uneven restrictions.
3, the structure can reduce the transmission noise, strong vibration absorption ability.
4, seamless high-pressure rubber joint inside, in the high temperature resistance, acid and alkali resistance, oil resistance pipeline more effectively to prevent the corrosion of corrosive media on the double ball rubber joint wall, improve the service life.
Application scope of rubber wire buckle joint:
Due to the good comprehensive performance of the rubber connector thread, it is widely used in chemical industry, construction, water supply, drainage, oil, heavy and light industry, refrigeration, sanitation, plumbing, fire, power and other basic engineering. For example: with the pump, the valve connection, the vibration bigger pipeline, the hot and cold change frequently pipeline and so on.
Instructions for use and installation:
1, high-rise water use of the product, the pipeline must have a fixed support or fixed bracket, otherwise the product should be installed anti-pulling device. The force of the fixed support or bracket must be greater than the axial force, or the anti-pulling device should be installed.
2. The working pressure selected according to the pipe is 0.25MPa, 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa and 4.0MPa;
3, wire buckle rubber connector is a kind of rubber connector. It is a hollow rubber product used for flexible connection between metal pipes.
4. According to the connection mode, there are three types: loose sleeve flange type, fixed flange type and thread type; According to the structure, it can be divided into five kinds: single sphere, double sphere, reducing body, bent sphere and wind pressure coil. By the inner and outer layer of glue,
5, cloth layer and wire ring composed of tubular rubber parts, after vulcanization molding and metal flange or parallel joint loose sleeve combination.
6. It can reduce vibration and noise, and can compensate thermal expansion and cold contraction caused by temperature change. It is widely used in various pipe systems.