High Purity Waste Water Treatment Cationic Polyacrylamide Flocculant

High Purity Waste Water Treatment Cationic Polyacrylamide Flocculant

waste water treatment cationic polyacrylamide flocculant for alumina red mud

Characteristics of red mud settlement
      The sedimentation and separation of red mud is an extremely complicated physical and chemical process. Bayer digestion pulp is a suspension formed by red mud and sodium aluminate solution. Due to the complex physical and chemical interaction between red mud particles and solution, the phase composition, particle size distribution, surface morphology of red mud particles, solid content, liquid phase composition and red mud slurry are made up of red mud particles. The temperature of liquid has obvious effect on the precipitation and separation process of red mud.
      If proper flocculants can be selected, the application of flocculant technology can greatly improve the solid-liquid separation speed and reduce the size of separation equipment. The mechanism of macromolecule flocculant is to induce effective agglomeration between red mud particles by bridging adsorption and neutralizing adsorption charge on the surface, and to form "big particles" so that the sedimentation speed is greatly accelerated. Different leached pulps have poor settling performance. It is necessary to select suitable macromolecule flocculant through experimental study, so as to achieve efficient separation of red mud.

Outstanding advantages of waste water treatment cationic polyacrylamide flocculant
♦ The flocculation process is fast and stable.
♦ The floc formed is small, strong and shear resistant.
♦ Effectively reducing the content of floating matter in aluminum acid solution and increasing the capacity of settlement tank
♦ Improving clarity and improving overflow quality
♦ Low liquid / solid ratio of underflow
♦ Prevention of red mud expansion
♦ Affected by temperature and pH value

Application of waste water treatment cationic polyacrylamide flocculant:
1. 1% of the alkali solution is allocated.
2. Control the temperature of alkali solution at about 50 C, dilute the sedimentation detergent to alkali solution according to 0.3% - 0.5%.
3. Put the diluted flocculant in storage tank for 30 minutes to dissolve the product fully and improve the use effect.

Packing:
This product is packed in 1000Kg ton barrels with gross weight of 1065KG and net weight of 1000Kg.

Storage and transportation:
The product quality is stable, sealed and cool for 6 months. Avoid contact with copper, iron and aluminum. Attention should be paid to packing, sealing, shipping and shipping.

waste water treatment cationic polyacrylamide flocculant Product processing plan