Soybean Seed Oil Refining Equipment / Cooking Oil Manufacturing Machine

soybean seed oil refining equipment / cooking oil manufacturing machine

1. The neutralizing tank is used for acid for acid,alkali refining or rinse

2. The decoloring tank is for bleaching grease

3. The deodorizing tank is sued for deodotization tank

4. The conducting oil furnance provide the heating for production

5. The vacuum pump provide vacumm for bleaching , deodorization which is can reach 755mmkg

6. The air compressor can dry the bleached clay

7. The air press is for filter clay

8. The stream gererator can gererate stream distillation

9. The quality of die refined oil reached to the standards for edible oil and sa ntitation by neutralization using phosphoric acid, water washing, bleaching and stean refining .

Main Equipments:

1. Roary extractor: The spray and soak the cake with solvent, so that oil fats can be dissolved in solvent (form miscella). After this step, wet meal and miscella (mixed oil) are got.

2. 1st evaporator: The miscella (mixed oil) will be sent to 1st evaporator to separate the oil and solvent. About 85% of oil can be separated from the mixed oil in this step.

3. 2nd evaporator: After the separating in the 1st the evaporator, the mixed oil is sent to 2nd evaporator. By the higher temperature and vacuum, 95% of the oil is get out from the solvent.

4. Stripping tower: This is the lastest step to separate the mixed oil. In this machine, all the oil will be seperated from the solvent.

5. DTDC toaster: The cake from the extractor will enter the DTDC toaster. The solvent in the cake can be moved out. Then the solvent can be recycled. The cake after separating solvent will dried in the toaster. Then you can storage it directly.

6. Condensers: The solvent from evaporate, stripping tower and toaster will recycled by the condenser. Then the running cost will be reduced. It is a modern and one of the most advanced extraction equipment that fixed grid of stainless steel plate extractor. Retained its low power consumption, reliable operation of equipment, long life, easy maintenance, good benefits leaching compared with traditional false bottom and flat rotor extractor. It also has the advantages of high yield, simplified structure, less operational failure, good leaching effect.

Henan Institute Of Grain Machinery Manufacturing Co., Ltd. is established driven by the academy of Henan University of Technology. As a large joint-stock enterprise integrating technology, manufacturer and sales, our company is specializing in the production of grain and oil machinery, agricultural and sideline machinery. 

•10-500T/H oil material first cleaning,drying and storage section turn-key project.

• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.  

1.    How can I get your quotation or project?

Please tell me your flowing information:

   What is your raw material?Sunflower,soybean,coconut,peanut,rapeseed or other?

   How much raw material do you want to process per day or per hour?

   Do you need crude oil or refined oil?

2.    How can I believe in your company?

We have more than 30years in all kinds of vegetable oil material machine production,and we have all kinds of production certificates,such CE,BV,ISO9001 and more,please visit our web: , and you will know more of us.

3.    What is your sales-after services?

Please don’t worry,dear,if we have chance to cooperate with each other,once we signed the contract,we will build special project service team for you,from the drawing to the production,we will have special workers for all process tracking.And we will arrange our special engineers to go your project site for installation and guidance.

4.    What is your MOQ?

At the moment,about the quantity,we have no special requirements,even if you just order one sets,we will do our best for you.

5.    What is material of your machine?

Usually,the parts which contact with oil directly and the important are stainless steel,other part is carbon steel or Si-Mn steel and other.And we can design it according to your requirements.

Such Our machine is of high quality, such as valves from Siemens, bearings from SKF,gear box from SEW, etc.. Automatic welding machine, X-ray test machine, steel rolling machine and others are equipped completely, which won customers’ trust from Europe, America, Mideast, Romania, etc.