High Power Programmable DC Power supply

Product Features of [High Power Programmable DC Power supply]

1. High-power adjustable voltage and constant current DC switching power supply;

2. At the same time, it can also be used in the forming power supply of capacitor;

3.10-inch color touch screen (MT6100I) display and setting;

4.PLC programmable controller (FP-X C38AT) control;

5. programming the output voltage to rise and down;

6. The stable voltage and constant current automatically switch smoothly, and the output voltage does not change when switching;

7. The continuous working time is long (at least 1000h), and the time drift is low (about 0.5%);

8. Have over-voltage, over-current, overheat, lack of phase automatic protection, failure, automatically cut off the power output alarm;

9. Non-standard customization can be made according to the customer's needs.

Product introduction of [High Power Programmable DC Power supply]

150V100A forming power supply is a voltage-stabilized and current-stabilized switching power supply. Advanced high-frequency pulse width modulation (PWM) technology is adopted to realize voltage stabilization and current stabilization by adjusting the pulse width of the conversion circuit. This power supply has the functions of high stability, low ripple voltage, long continuous time, over-voltage, over-current, overheating, and phase-lack automatic protection to cut off the output function, so that the output voltage and current can be kept reliable and stable under any circumstances. The whole system is controlled by Panasonic PLC Programmable Logic Controller (FP-X C38AT), which is measured by PLC self-embedded two-way A / D conversion module and two-way D / A conversion. All the parameters and the working state of the instrument are displayed and set on the 10-inch color touch screen (MT6103iP) in Taiwan. All kinds of parameters are cut off and memory, and the user-friendly interface is easy to operate.

Technical parameters of [high power programmable DC power supply] (non-standard customizable)

Input characteristics：

1. Input voltage: ac three-phase five-wire system 380 V ±10%;

2. Input frequency: 50 Hz plus 10%;

3. Working environment: temperature: 10 ℃ ~ 30 ℃, humidity: ≤ 75% RH;

4. Power supply safety tube: 63A;

5. Device height: about 160 cm;

6. Color: Huawei ash.

Qualification：

1. Input and output

(1) input: ac three-phase five-wire system 380 V ±10% 50Hz ±10%;

(2) output: DC steady current;

(3) DC output voltage: 0 μ 150V (close to 0);

(4) DC output current: 0-100A;

2. Voltage stabilization precision

(1) Source effect: ≤ 0.2% rating;

(2) time drift: ≤ 0.3% rating;

(3) temperature drift: ≤ 0.5 ‰ / ℃ ±2 words (within half an hour);

(4) load effect: ≤ 0.3% rating ±2 words;

3. Steady current precision

(1) Source effect: 0.2% rated value;

(2) at the time of bleaching: at least 0.3% of the rated value;

(3) temperature drift: ≤ 0.5 ‰ / ℃ ±2 words;

(4) load effect: ≤ 0.3% rating ±2 words;

4. Ripple (r.m.s): ≤ 0.5% rated 10mV (80%-100% rated output) measured;

5. Efficiency: ≥ 80%;

6. Protection mode: have overvoltage, overcurrent, overheat, lack of phase automatic protection;

7. Short circuit protection: when the fault occurs, automatically cut off the power output alarm;

8. Constant voltage and constant current switching: man-made short circuit is strictly forbidden, which can be turned on by short circuit;

9. Operation mode: steady pressure and steady current automatic smooth switching, switching output voltage change no jump.

Maintenance and regular maintenance of [high Power Programmable DC Power supply]  

Maintenance:

To prevent the occurrence of electric shock, do not lift the cover of the instrument. All parts inside the instrument need not be maintained by the user. If there is an abnormal condition in the instrument, please ask for maintenance from my laboratory. the attached lines and block diagrams are for reference only.

Regular maintenance:

At least once a year, the AC power supply and relevant accessories of input power line shall be carefully checked and checked to protect the safety of the user and the accuracy of the instrument.

For more information about products, please contact us and visit the company.

Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou

Tel: 86-20-37896688

Fax:86-20-37896699

Mobile phone: 86-13711272581,Miss Liu

Web site: