Single Battery Forced Internal Short-circuit Testing Machine

Product characteristics of [Single battery forced internal short-circuit testing machine]

1. Applicable standard JISC8714:2017 (BAJ/ JSA), IEC62133-2012 test requirements;

2. After the battery monomer was mixed with L-shaped nickel sheet, the safety performance of its internal forced short circuit was tested.

3. Step-by-step motor is used as power source;

4. According to the parameters set up in the standard, the test shall be completed automatically;

5. Using 7-inch real-color touch screen display, setting parameters and operation;

6. 10 nickel tablets for L-shaped test;

7. The whole test was carried out in the high and low temperature test chamber.

8. Can be customized according to customer needs non-standard.

Product brief introduction of [single Battery forced Internal short Circuit testing Machine]

Model 7205A forced internal short circuit test-bed for single battery is designed and manufactured according to the test requirements of Japanese industry standard JISC8714:2017 5.5.5.The required equipment for PSE certification is also applicable to the relevant provisions of the UN38.3,IEC62133 standard. The device is a special equipment for the safety test of lithium-ion battery for portable electronic equipment. It adopts the control system of the interface between Panasonic PLC and touch screen, and can display and set various parameters digitally. The test has the advantages of simple operation, accurate positioning, high efficiency and stable performance. And the power-off memory, Humanized features such as error warnings.

Technical parameters of [single battery forced internal short circuit tester]  (non-standard)

1. Pressure tools: stainless steel square column with side length 10mm ±0.1mm;

2. The pressing speed: 0.1mm/ S, error:%5%;

3. pressing stroke:0-50 mm;

4. Pressure range: 0 × 1000N, error: ±1%FS ±2 words, resolution 1N;

5. Battery voltage measurement range: 0 * 9999mV, error: ±1% ±2 words, resolution 1 mV;

6. During the test, when the sample has a drop above 50mV or the pressure is up to 800N, the equipment pressure is kept at 30s and then the applied pressure is lifted.

7. Part of the pressure equipment is placed in the high and low temperature test chamber, and the single battery pressure is completed in this test environment;

8. Power source: stepping motor;

9. Display and operation: Taiwan Weilun touch screen;

10. High and low temperature test chamber: the internal size is W500mm / H600mm / D400mm, the temperature control range is 10 ~ 60 °C, ±2 °C, and the temperature control range is 10 ~ 60 °C, ±2 °C.

11. Fixture for testing:

A.Nitrile Rubber,，10*10*

B.Acrylic Resin,5*5*2,10pcs;

C. L-shaped nickel sheet,10 pcs;

12. Power supply: 220 V + 10%, 50 / 60 Hz + 2 Hz,4.5KW.

Maintenance and regular maintenance of [single battery forced internal short circuit tester]

Maintenance:

To prevent the occurrence of electric shock, do not lift the cover of the instrument. All parts inside the instrument need not be maintained by the user. If there is an abnormal condition in the instrument, please ask for maintenance from my laboratory. the attached lines and block diagrams are for reference only.

Regular maintenance:

At least once a year, the AC power supply and relevant accessories of input power line shall be carefully checked and checked to protect the safety of the user and the accuracy of the instrument....

For more information about products, please contact us and visit the company.

Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou

Tel: 86-20-37896688

Fax:86-20-37896699

Mobile phone: 86-13711272581,Miss Liu

Web site: