Two component silicon pump Pneumatic two component silicon sealing extruder

Two component silicon pump -  Pneumatic Two component silicon extruder machine

1. Mixing ration proportion of mixture :  6:1-14:1

2. Raw material barrel : 55galon

3.Solidification pharmaceutical barrel: 5galon

4. Max. air-consumption volume: 0.5m3/min

5. Max. squeeze pressure: 20Mpa

6. Air source pressure : 0.5-0.8mpa

1. It is composed of raw material pump,solifification pharmaceutical pump, Proportional pump, sealant-mixture system, hydraulic pressure system, electronic system and so on.

2. Raw material pump, solidification pharmaceutical pump and proportional pump adopt the special high-pressure filling pump and the material can be supported equivalently in two-way. The raw material pump is compelled by the hydraulic pressure system while the solicitation pharmaceutical pump is compelled by the pneumatic motor.

3. There are high-pressure values in the under part entrance of solidification pharmaceutical filter and material-feeding place of the mixing device and one-way valve is set in the nixing device so as to prevent two-components from fleeing each other.

4. Rising and falling system is controlled by hand valve and the proportion of the two components can be changed by adjusting the slipper in the swinging pole.Tightening the nut once the demanding once is reached.

More machines specification, More machines photos, warmly welcome to inquiry, thanks.

Contact person: Lucy

whatsapp or tel : 0086 151 6904 2082

Warmly welcome to contact me. :) Thanks in advance.