silicone fluid, finishing agent, textile auxiliary 316

Basic Characteristics

Appearance: slightly yellow transparent liquid

Ionic: slight cationic / non-ionic

PH value: 4.5—6.5

Solubility: can be dissolved in water at any ratio

Hand feeling: special soft, smooth

Features And Advantages

☆This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing;

☆Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect.

☆ Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing;

Dilution and use the method

☆This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value;

☆A(yù)fter thinning, you can use exhausting method and continuous padding method,

Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 ℃, 15-30min, bath ratio 1: 20-40;

Padding method: the dosage (20% solids) 20-40g / l, 120 ℃pre-bake, 150-180 ℃

Package And Storage

50kg or 120kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.