Xenon Aging Test Machine for Chassis Systems

Xenon Aging Test Machine for Chassis Systems

Xenon Accelerated Test Chamber/Technical parameters:

1 Model : customer specified non-standard custom

2. the use of light: closed carbon arc lamp (EnclosedCarbon-arc)

3.week period of testing time : 20 hours , each time using two carbon rods

4.carbide types: UV fade -use carbon rods

There are core carbon rod : diameter 13 about 0.4mm, length 305 about 3mm

No core carbon rod : diameter 13 about 0.4mm, length 305 about 3mm

5.arc voltage , the current value :

AC voltage: allowable range 125 ~ 145V, center value 135 about 10V

AC current : the permissible range 15 ~ 17A, the central value 16 about 2A

6.carbon arc lamp filter mask : colorless transparent glass for the high temperature Chung cover ( effective use of time limits 2000 hours )

7.test specimen fixed turret with :

a. stainless steel with a diameter of 508 about 10mm * 3r.p.m

Loadable standard test piece 1.50 * 100mm (WxL) * 20 tablets ( two-piece type rack )

( Choose one ) 2.70 * 150mm (WxL) * 20 tablets ( monolithic rack )

8.Temperature and humidity range : according to the black plate thermometer (Blackpaneltemperature) prevail

a.temperature range :. 40 ~ ~ 70 celsius degree , black plate thermometer was 63 about 3 celsius degree 

b.humidity range : black plate thermometer was 63 about 3 celsius degree when ps environmental conditions : temperature : 25 about 3 celsius degree , relative humidity : 65 about 20percent

c.Temperature control: automatic adjustment of intake and exhaust , balance control temperature

Water supply equipment ( customer self-care ) :

1 . Pressure 1.5 ~ 3.0kgf/cm2

2 . Temperature 10 ~ 20 celsius degree 

3 Water PH6.0 ~ 8.0, when necessary, use water softening or water plant

Xenon Test Machine/Structures and materials:

a. test tank is stainless steel products SUS304 #, steel shell body paint treatment

b. test cell door attached UV window

c. insulation layer temperature type PU foam

Accelerated Weathering Test Chamber/Control instruments :

a.power switch : Power type NFB (NFBAC220V single phase 40A)

b.Operation Time control: microcomputer digital type , with power and memory devices (0 ~ ~ 99.9hr)

c.Test Temperature Control : microcomputer digital type, belonging to the signal output means (0 ~ 100 celsius degree )

d.carbon arc lamp system : voltmeter - digital type , with a signal output device (0 ~ 250V)

Meter - digital type, belonging to the signal output means (0 ~ 100A)

e.all kinds of operating switch : start, stop , swing , carbon arc lamps

f.security alarm control : low water , air overload, turning overload, over-temperature , carbon arc lamp voltage , current overload alarm and other security controls

Xenon Meter/Accessories:

a.supply automatic voltage regulator device (200-240V7Kva)

b.carbon arc lamp filter mask ( heat-resistant reinforced * 1 )

c.carbon arc lamp with a carbon rod ( with and without core carbide each 2 )

d.stainless steel specimen rack . ( 20 - single or double sheet type , choose one )

e.black plate thermometer( a group )

Xenon Aging Test Machine/Other details:

Including on-site installation and commissioning operation ( on-site water and electricity supply and discharge and exhaust equipment responsibility of the buyer )

Delivery: Delivery within 20 days after contracting

Warranty: One year

( According to CNS-11229.JIS-B-7751.ASTM-G-23. Standard specifications for the system )