The Common Problems of Screw Oil Press

During the using of screw oil press, three are some common problems of it, just easy, let's face and solve it.

1.Increase press oil production cost, and the power consumption is improved.

2.Just improve motor power destroyed the machine's overall speed ratio. Motor power was increased, reducer speed ratio was unchanged, it will cause reducer runs non-normally and high-load for long-term, resulting in shortening the life of reducer and the price of oil press, high failure rate, and impact production. Even if the reducer increase as the speed ratio, but the pressing chamber and pressing screw do not increase size, also lead the pressing screw speed is too fast. Oil crops were not squeezed fully in the pressing chamber, and flow out from the outlet with oil, thus reduce the oil yield.

In the above condition, when the machine is working, the machine is not running stably. So the oil press machine often breaks up, such as, the spare parts was damaged, it is difficult to produce stably and highly for a long time.

Zhengzhou Bona Enterprise Co., Ltd

Tel: 0086-371-87091886

Fax: 0086-371-87091887

skype:zedekiahzhao

e-mail:zed@mixing-plant(dot)com

URL//www(dot)bona-farmmachine(dot)com

URL//www(dot)zzbona(dot)com