Keson KS365 Vehicle GPS Tracker Built-in Backup Battery And Simcom For Realtime Tracking And Monitor

Keson KS365 Vehicle GPS Tracker Built-in Backup Battery And Simcom For Realtime Tracking And Monitoring

Attention:

1. Make sure to read this manual carefully before using this product.

2. Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the tracker will not work normally.

3. Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to host power. Must not install or take down the tracker when it is power on. If you found any troubles or omissions about the connections of cables, please cut off power first, otherwise you will easily damage the tracker.

4. The tracker works in wireless communications, so please cut off the host power before your vehicles entering fuel depot and dangerous material place.

5. The tracker’s work voltage is 9V-30V. Please use the tracker in the scope of work voltage.

6. The host of GPS tracker is a low-power wireless transmitter and receiver. It receives and sends radio frequency signal when it is working.

7. To avoid electromagnetic interference or uncompatible configuration, please stop using your tracker in the noticed place.

Specification:

Detailed Description:

1. Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself.

2. Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it breaches the district.

3. Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.

4. Mileage statistics; ACC checking; cutting off power and alarm.

5. Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter.
6. Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers.

﹡Modify the IP and Port of Communication Protocol for different on-line positioning platform

Applications:

4S shop, car company, truck company, motorcycle company,GPS producer, large-scale shopping malls, exclusive agency, chain shops, large-scale sales, car repair shop,taxi company, bus company.