MVCI for Toyota TIS

MVCI For TOYOTA TIS  Interface

MVCI is a high performance factory diagnostics and reprogramming interface for TOYOTA TIS. MVCI is compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector.

Features

1. Fully compatible with Toyota TIS Techstream
2. Supports Diagnostics, Reprogramming, Active tests, and key programming
3. Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics
4. Fully compatible with SAE J2534
5. Programmable power supply
6. Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector
7. Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connector
8. RGB status LEDs

Supported Protocols

• K-Line ISO 9141
• KWP 2000 ISO 14230-4
• SAE J1850 PWM
• SAE J1850 VPW
• CAN 2.0B ISO 11898
• CAN ISO 15765-4

Specifications

• Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
• Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
• Diagnostic Interface: 16PIN
• USB Interface : USB 2.0
• Power: DC 5 V - 36V
• Consumption: 0.7W
• Dimensions: 95mm(3.74″)L x 49mm(1.93″)W x 28mm(1.10″)H
• Net Weight: 85g
• Gross Weight: 193g

Accessories Included

1. User Manual: Instructions on tool operations
2. Driver CD: Includes user manual, drivers, and etc.
3. OBD II cable: Communicates between tool and vehicle
4. USB cable: Communicates between tool and PC/Laptop
5. Carry case: A nylon case to store the tool when not in use