Cummins INLINE 5 Turck Diagnostic Tool

Meet the Cummins INLINE 4 and INLINE 5 Data Link Adapters. These adapters are genuine Cummins products and are the only adapters available that Cummins certifies to be 100% compatible with all features of the latest Cummins software applications. The INLINE 4 and INLINE 5 can communicate with your PC or PDA through a 9-pin serial connector. The INLINE 5 also can communicate with your PC over a Universal Serial Bus (USB) through a 5-pin mini-connector. Either adapter connects to vehicle power and the SAE J1708/J1587 and J1939/CAN data links via a 25-pin serial connector. The pin arrangement on the serial and data link connectors is identical to prior Cummins INLINE adapters, so your INLINE 4 or INLINE 5 will even work with your prior INLINE data link cables.

With full compliance to the Technology and Maintenance Council's RP1210 standard, the INLINE 4 and INLINE 5 will work with the latest Cummins INSITE, INFORM, PowerSpec, and Calterm III software applications. Both will also work with the new QuickCheck 4, QuickSpec 4, and QuickTrip 4 RP1210-compatible software, plus any other software applications that are fully compliant with the RP1210 standard (note that while some non-Cummins applications fully support RP1210, others do not, so you should test each application in question with the INLINE 4 or INLINE 5 adapter to make that determination).

Cummins has become the innovator and technology leader in data link adapters and service tools for diesel engines. The eye-catching INLINE 4 and INLINE 5 break new ground by utilizing the latest electronic technology to deliver high performance and high quality at an attractive price. If you ever use data link adapters to download new calibrations to ECMs, you really should be taking advantage of the high-speed communications capabilities inherent in these Cummins adapters. So why waste your time and money on more expensive, inferior products that are not fully-compatible with Cummins software? Check out the entire family of INLINE products (patents pending) by selecting from the Products menu above.

Each Cummins INLINE kit contains a data link adapter, basic cables, and the INLINE PC software driver. Load the software driver, connect all the hardware, and you are ready to start a new era in data link adapters!

• Supports SAE J1708/J1587 and J1939/CAN data links
• Supports USB full speed port at up to 2M baud rate
• Supports RS-232 PC/PDA serial port at up to 115.2k baud rate
• Is fully compliant with TMC's RP1210 standard
• Small enough to fit in pocket
• Aluminum housing provides ruggedness
• Derives 8 V to 50 V DC power from vehicle
• Includes advanced processor for maximum speed and performance
• Internal Flash memory allows firmware upgradeability
• Includes 5 LEDs to indicate power and USB, RS-232, J1708/J1587, and J1939/CAN communications
• Certified to meet European CE requirements
• Rated for -40° to +85° C operating temperature
• INLINE 5 meets Cummins in-cab environmental test requirements

INLINE 5 product kit (P/N 4918416) includes:

• INLINE 5 data link adapter (P/N 3165033)
• USB 2 meter cable (P/N 4918419)
• DB9F/DB9M 6 ft. cable (P/N 4918418)
• DB25F/9-pin data link cable (P/N 3165159)
• DB25F/6-pin data link cable (P/N 3165160)
• INLINE 5 software CD (P/N 4918417)
• Storage case (P/N 3165143)
• Protective boot (P/N 4918436)